Programme finishedat
Make sure that the time has been set - see •Set
clock", | Page38. | |
Before | starting | a programme, you can specify the ti |
at which the | programme ends. | |
Turn the programme selector to the desired programme.
Load the laundry and close the loading door. The •Start/Pause" indicator light flashes (red).
Select an additional option.
Example: |
Press the •Menu" button until, •Programme finished at" is displayed. Current end time flashes.
The •Start/Pause" indicator light flashes (red).
i The menu is left if a button is not pressed with 10seconds.
Press the •Change" button until the programme end time is displayed.
The programme end can be set in 30minute steps.
The time can be programmed up to a maximum
24 hours in advance.
i The end time must be reset if the programme, additional options or the current time is changed.
i If there is a small load of lightly soiled washing, programme may end well before the selected end time.
If there is a large load of heavily soiled washing programme may end several minutes after the selected end time.
31