AEG W 808 manual Consumption values and time requirements, Before the First Wash

Operating Instructions

Consumption values and time requirements

The values for selected programmes in the following tables were deter- mined under standardized conditions. They are nonetheless a useful guide for domestic use.

	Tempera-	Filling	Water	Energy	Time in
Programme knob	ture selec-	quantity
			in litres	in kWh	minutes
	tor	in kg
t2 (COTTONS/LINEN)	95	5	57	1.90	140
t2 (COTTONS/LINEN)	601)	5	54	0.95	128
t2 (COTTONS/LINEN)	40	5	54	0.60	115
}7 (EASY-CARES)	40	2.5	45	0.40	65
Ã12 (DELICATES)	30	2.5	40	0.25	40
s11 (WOOLLENS)	30	2	43	0.25	50

1)Information: Programme setting for a test in accordance with EN 60 456. The consumption values can deviate from the stated values depending on the water pressure, hardness, inlet temperature, room temperature, type and quantity of washing, the detergent powder/liquid used, fluctuations in the mains voltage and selected additional functions.

Before the First Wash

01. Pull the washing powder drawer out slightly.

2.Pour about 1 litre of water through the washing powder drawer into the washing machine. The next time a programme is started the solu- tion container will be closed and the eco-sluice can function correctly.

3.Run one wash cycle without washing:

–Programme knob on Position t2 (COTTONS/LINEN);

–Temperature 95 °C;

–Only add half the quantity of detergent recommended by the manu- facturer for a full load.

This removes residues left over from manufacture on the drum and so- lution container.

14