AEG W 808 manual Compensate for floor unevenness

Page 40

Installation and connection instructions

Compensate for floor unevenness

Floor unevenness can be compensated for and the height can be cor- rected with the four adjustable screw feet. The height can be adjusted in the range +10 .. -5mm.

To adjust the feet use the special spanner supplied for removing the transport braces.

01. Slide the special key firmly onto the hexagon head of the threa-

ded foot as far as it will go.

2. Adjust the screw feet so that the unit is horizontal and stable. The

unit must not wobble over when loaded.

3. If necessary, check the setting

with a spirit level.

Important! Minor unevenness of the floor surface should never be levelled out by laying pieces of

wood, card or similar materials, but rather should always be com-

pensated for by adjusting the adjustable feet.

Image 40

Contents Lavamat W Dear Customer Please read this user information carefullyContents Separate Spin What to do ifWarranty conditions / Customer service centres Before Using for the First Time SafetyCorrect Use Child Safety General SafetyDisposal Environmental tipsDisposing of the Packaging Material Disposing of your old applianceFront view Unit descriptionDrawer for Washing Powder and Care Agent Control Panel Programme KnobProgramme group t COTTONS/LINEN PRE WashProgramme group EASY-CARES Programme group sWOOLLENS/ÃDELICATESSpin 11 WoollensTemperature Selector Pump OUTAdditional Programme Buttons SoakingON/OFF button StainBefore the First Wash Consumption values and time requirementsTempera Filling Water Energy Time Programme knob Prepare washing cycle Sort washing and prepareWashing Types and Care Symbols How much detergent and care agent? Water SoftenerWater Hardness Details Water Hardness dHRunning a Wash Cycle When the wash programme has been completedBrief Instructions Add the washing If using liquid detergent / tablets Add Washing Detergent and/Care AgentCompartment for in-wash stain treatment Compartment for pre-wash detergent/ soaking agentSetting the Wash Programme Changing the Spin Speed/Selecting Rinse Hold Start the Wash ProgrammeChanging settings Wash Programme ProgressChanging/Interrupting the Wash Programme Programme progress displayWash Cycle Completed/Removing Washing If q Soaking has been selectedIf o Rinse Hold has been selected Once the programme is completedProgramme Tables WashingSeparate Conditioning/Starching/Finishing Separate RinseSeparate Spin Cleaning and Care Detergent DrawerWashing Drum Main doorCleaning the drain pump Problem Possible Cause Remedy Remedying FaultsWhat to do if Feet are not correctly set Tion and connection Drawer æfor care If the washing results are not satisfactory Carrying out emergency drainageIf there are still grey spots on the washing If at the end of the last rinse foam is still visibleWhen the water is completely drained Gency drainage and pull out the mains plugCancelling the child safety feature Child Safety FeatureSetting the child safety feature Installation and connection instructions Installation Safety PrecautionsTransporting the appliance Installation of the applianceRemove transport packaging Are supplied with it Installation on a concrete base Prepare the installation placeInstallation on vibrating floors Compensate for floor unevenness Water connection Electrical connectionPermissible water pressure Water inflow Water drain Delivery heads over 1mWater drain-off inside a siphon Water drain-off inside a basinTechnical data DimensionsFurther after-sales service agencies overseas Autres agences étrangères assurant le service après-venteWeitere Kundendienststellen im Ausland Otros puntos de Postventa en el extranjeroCroatia New Zealand Bulgaria Kuwait/Arabian GulfCyprus Lebanon Oman Estonia Latavia PolandIsrael Malaysia Saudi Arabia Japan Singapore SloveniaThailand Slovakia Rep South Africa HungaryPage Page Index Service When do you incur costs even during the warranty period?AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG