CDA 3Z9 manual Using the extractor as a recirculation device

Page 9

Using the extractor as a recirculation device

Prise off the vent outlet cover using a screwdriver, as shown in fig 12 and assemble as shown in fig 13.

Using the extractor as an extraction device

Feed the duct pipe through the top cover and fix it to the duct adapter ring. Connect the ring to the extractor and refit the top cover panel as shown in figure 14. Note that charcoal filters are not required when the unit is to be operating in this manner.

Fig. 12

Fig. 13

Fig. 14

Image 9

Contents 3Z9 Extractors Appliance information CE Declarations of ConformityPlease note Using your Extractor Cleaning Care and MaintenanceCleaning the grease filter Changing the charcoal filter re-circulating onlyChanging the Light Mains Electricity Connection Total rated power consumptionElectrical Information If your extractor is not workingFitting your extractor to the wall InstallationInstallation Using the extractor as an extraction device Using the extractor as a recirculation devicePage Page Customer Care Department 01949 862