AEG 74950A user manual Machine vibrates or is noisy, Spin, No water is visible in the drum

			What to do if…	29
Problem			Possible cause/Solution
		The transit bolts and packing have not been re-
		moved.
		•	Check the correct installation of the appli-
			ance.
The machine vibrates or is noisy:		The support feet have not been adjusted
		•	Check the correct levelling of the appliance.
		The laundry is not evenly distributed in the
		drum.
		•	Redistribute the laundry.
		Maybe there is very little laundry in the drum.
		•	Load more laundry.
		The electronic unbalance detection device has
		cut in because the laundry is not evenly distrib-
		uted in the drum. The laundry is redistributed
		by reverse rotation of the drum. This may hap-
		pen several times before the unbalance disap-
Spinning starts late or the machine does not		pears and normal spinning can resume. If, after
		some minutes, the laundry is still not evenly
spin:		distributed in the drum, the machine will not
		spin.
		•	Redistribute the laundry.
		The load is too small.
		•	Add more items, redistribute the load man-
			ually and then select the spinning pro-
			gramme.
		The machine is fitted with a type of motor which
		makes an unusual noise compared with other
The machine makes an unusual noise:		traditional motors. This new motor ensures a
		softer start and more even distribution of the
		laundry in the drum when spinning, as well as
		increased stability of the machine.
No water is visible in the drum:		Machines based on modern technology operate
		very economically using very little water with-
		out affecting performance.
		Anti-flooding system has activated.
The display shows the alarm code	:	•	Disconnect the appliance and contact the
			Service Force Centre
The drum light doesn’t work:		Please contact your local Service Centre.