AEG 74950A user manual Select the Delay Start button, Altering an option or a running programme

Page 13

Daily use 13

If an incorrect option is selected, the yellow pilot light of the button 7 blinks 3 times and the message Err is displayed for a few seconds.

Select the DELAY START (button 8)

Before you start the programme , if you wish to delay the start, press the button re- peatedly, to select the desired delay.

The corresponding symbol will appear on the display. The wash programme can be delayed from 30 min - 60 min - 90 min, 2 hours and then by 1 hour up to a maximum of 20 hours by means of this button.

The selected delay time value will appear on the display for about 3 seconds, then the duration of the programme will appear again.

You must select this option after you have set the programme and before you press the button 7 .

You can modify or cancel the delay time at any moment, before you press the button 7 . The door will be locked throughout the delay time. If you wish to add laundry in the machine during the delay time, press the button 7 to set the machine to pause. When the Door symbol disappears, the door can be opened. Add the laundry, close the door and press the button 7 again.

Selecting the delayed start.

Select the programme and the required options.

Select the delay start.

Press button 7 : the appliance starts its hourly countdown. The programme will start after the selected delay has expired.

Cancelling the delayed start

Set the washing machine to PAUSE by pressing the button 7 ;

Press button 8 until the symbol ’ is displayed;

Press the button 7 again to start the programme.

The selected delay can be changed only after selecting the washing programme again.

The Delay Start can not be selected with Drain programme.

Altering an option or a running programme

It is possible to change some options before the programme carries them out. Before you make any change, you must pause the washing machine by pressing the button 7 . Changing a running programme is possible only by resetting it . Turn the programme

selector dial to and then to the new programme position. Start the new programme by pressing the 7 button again. The washing water in the tub will not emptied out.

Interrupting a programme

Press the button 7 to interrupt a programme which is running, the corresponding light starts blinking. Press the button again to restart the programme.

Cancelling a programme

Turn the selector dial to to cancel a programme which is running. Now you can select a new programme.

Image 13
Contents Lavamat 74950A Contents General safety Safety informationEnvironment concerns Ecological hints Packaging materials 132950410 00Child Safety InstallationUse Product description Detergent dispenser drawer Control panelDrain , Overdosage DisplayFirst use Acoustic signalsPersonalization Daily use Child safety lockMeasure out the detergent and the fabric softener Select the desired Temperature Button Prewash option Programme option buttonsSensitive option Stain optionExtra Rinse option additional rinse Select the Time Saving option buttonCancelling a programme Select the Delay Start buttonAltering an option or a running programme Interrupting a programmeOpening the door after the programme has started Washing programmesAt the end of the programme COTTONS/LINEN40 60 MIX Mixed Fabrics HygieneMain wash Rinses Long spin at 1200 rpm Max. load 4 kg Main wash Rinses Short spin at 1200 rpm Max. load 1,5 kg Easy Iron PlusMain wash Rinses Short spin at 1200 rpm Max. load kg Delicate RinsesDuvets Spin20 MIN. 3KG Sport IntensiveQuick Intensive Super ECOHelpful hints and tips TemperaturesSorting out the laundry Before loading the laundryMaximum loads Laundry weightsRemoving stains 100 gDetergents and additives Care and cleaningDegrees of water hardness External cleaning Maintenance washDescaling After each washDoor seal Washing drumDrain pump Care and cleaning Cleaning the water inlet filters What to do if… Frost precautionsEmergency emptying out Washing machine does not start Machine does not fill What to do if…Drain hose is squashed or kinked Clean the drain filterReduce the detergent quantity or use anoth- er one Change it with a new oneMachine vibrates or is noisy Display shows the alarm codeSpin No water is visible in the drumConsumption values Technical dataFor the duration Unpacking InstallationPage Water inlet Positioning and levellingAppliance Water drainage Water-stop deviceEnvironment concerns Electrical connectionEcological hints Packaging materialsPage Page 132950410 00