AEG 86741 Installation of the appliance, Transporting the appliance, Remove transport packaging

Page 45

Installation and connection instructions

Installation of the appliance

Transporting the appliance

•Do not place the washing machine on its front or on its right hand side (viewed from the front). This is to prevent the possibility of the electronic components becoming wet.

•Never transport the unit without the transport packaging and bolts/ bars. Do not remove the transport packaging until the appliance is at the installation location. Transporting the unit without the transport packaging can damage it.

•Never lift the appliance by the door.

When transporting the unit with a sack trolley:

•Attach the sack trolley only at the side. The shovel of the sack trolley must not be longer than 24 cm, otherwise the float switch can be de- stroyed.

Remove transport packaging

Important! It is essential to re- move the transport packaging be- fore putting the appliance into operation. Keep all parts of the transport packaging in a safe place for future use.

0 1. Open both hose holders on the appliance's rear side and remove the hoses and mains cable.

2.Pull both hose holders off the ap-

pliance with a strong pull.

45

Image 45

Contents ÖKO-LAVAMAT 86741 update Pages of this instruction book Dear CustomerFuture owners ApplianceContents Installation and connection instructions Page Safety Prior to initial start-upIntended Use General Safety Child SafetyDisposal When disposing of the washing machineEnvironmental tips PackagingDescription of the Appliance Front viewDetergent dispenser drawer Programme selector Control PanelRinse water it is not spun To drain the water after a rinse hold without spinningWash programme for Delicates at 30 C or 40 C Wool / P HandwashPRE Wash Pre-wash/Soaking Programme Option ButtonsTime Saver Programmable functionsConsumption Values and Programme Times Wash Time DisplayRation, in minutes, of the programme Anti-flood Aqua Control + Aqua Alarm What does Update mean?Before the first wash Preparing for a wash cycleSorting and preparing the washing Types of washing and care symbols Quantities of detergent and conditioners? Water softeningWater hardness details Running a washing cycle Setting the wash programmeBrief instructions After the washing programme has endedJusted to suit the washing programme Changing Spin Speed /selectingWool / PHandwash SILK/ PHandwashSoaking duration Setting the delay timer/soaking duration Delay timerLoading the washing Opening and closing the doorDetergents and conditioners Adding detergent/conditionersFor use with the Stain programme option only Compartment for main wash detergentIf a delay start has been set If using liquid detergents/tabletsStarting the wash programme Push the detergent dispenser drawer in fullyProgramme progress display Washing Programme ProgressMulti display Changing spin speedWash Washing cycle complete/Removing the washingWashing Programme TablesSeparate Spinning Separate Rinse/Conditioning/Starching/TreatingMaintenance and Cleaning To run a maintenance wash Maintenance WashWashing Machine Drum Main doorBefore cleaning the drain pump Cleaning the drain pumpTrouble Shooting What to do ifLow Been removed Connection instructions Appliance is Rinse water is If there are still grey stains on the washing If the washing results are not satisfactoryIf after the last rinse foam is still visible If there are white residues on the washingHave a flat container on hand to catch the water Carrying out an emergency emptyingUnlock feature When the water is completely drainedEmergency unlocking of the door Supply firstAdditional rinse cycle RINSE+ To cancel the additional rinseHelpful to rinse with extra water To set the additional rinseWater cooling To cancel water coolingAdditional rinse cycle and water cooling To set the water cooling functionTo cancel Variomatic Spin Variomatic spinTo set Variomatic Spin Setting the Programme Protection Cancelling the Programme ProtectionProgramme Protection Cancelling the child safety feature Child Safety FeatureWashing programme can be StartedInstallation Safety Precautions Installation and connection instructionsWhen transporting the unit with a sack trolley Installation of the applianceTransporting the appliance Remove transport packagingCover the hole with the cap C Are supplied with itInstallation on a Suspended Floor Installation-Site preparationLevelling the appliance Electrical Connection Measures not be observedEarth Blue Neutral Brown Live Permanent Connection Water connectionTerference UserWater pressure Inlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical DataHeight adjustment About +10/-5mm Dimensions in mmGreat Britain Warranty conditionsPage Index 0870 5 929 Help us to help you Service & Spare PartsPNC Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG