AEG 86741 manual Running a washing cycle, Brief instructions, Setting the wash programme

Page 19

Operating Instructions

Running a washing cycle

Brief instructions

A washing cycle consists of the following steps:

01. Set the appropriate washing programme:

–Set the programme and temperature using the programme selector

–Select any programme options if required

2.Change the Spin Speed/select RINSE HOLD as necessary.

3.Set the DELAY TIMER as required.

4.Open the door and load the washing.

5.Close the door.

6.Add detergent/conditioner.

7.Start the washing programme by pressing the START/PAUSE button.

After the washing programme has ended:

Important! If the washing cycle has ended with a Rinse Hold, select DRAIN, SPIN or SHORT SPIN before opening the door.

8.Open the door and remove the washing.

9.To switch off the washing machine, turn the programme selector to OFF.

Setting the wash programme

3	See “Programme tables“ for a suitable programme, correct temperature
	and possible options to suit the type of washing.

0 1. Set the programme selector to the desired wash programme with the desired temperature.

The expected duration of the programme selected is displayed in the multi display in minutes.

19

Image 19

Contents ÖKO-LAVAMAT 86741 update Appliance Dear CustomerPages of this instruction book Future ownersContents Installation and connection instructions Page Prior to initial start-up SafetyIntended Use General Safety Child SafetyPackaging When disposing of the washing machineDisposal Environmental tipsFront view Description of the ApplianceDetergent dispenser drawer Programme selector Control PanelWool / P Handwash To drain the water after a rinse hold without spinningRinse water it is not spun Wash programme for Delicates at 30 C or 40 CPRE Wash Pre-wash/Soaking Programme Option ButtonsTime Saver Programmable functionsWash Time Display Consumption Values and Programme TimesRation, in minutes, of the programme Anti-flood Aqua Control + Aqua Alarm What does Update mean?Preparing for a wash cycle Before the first washSorting and preparing the washing Types of washing and care symbols Water softening Quantities of detergent and conditioners?Water hardness details After the washing programme has ended Setting the wash programmeRunning a washing cycle Brief instructionsSILK/ PHandwash Changing Spin Speed /selectingJusted to suit the washing programme Wool / PHandwashSoaking duration Setting the delay timer/soaking duration Delay timerLoading the washing Opening and closing the doorCompartment for main wash detergent Adding detergent/conditionersDetergents and conditioners For use with the Stain programme option onlyPush the detergent dispenser drawer in fully If using liquid detergents/tabletsIf a delay start has been set Starting the wash programmeChanging spin speed Washing Programme ProgressProgramme progress display Multi displayWash Washing cycle complete/Removing the washingWashing Programme TablesSeparate Spinning Separate Rinse/Conditioning/Starching/TreatingMaintenance and Cleaning Main door Maintenance WashTo run a maintenance wash Washing Machine DrumBefore cleaning the drain pump Cleaning the drain pumpWhat to do if Trouble ShootingLow Been removed Connection instructions Appliance is Rinse water is If there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the last rinse foam is still visibleHave a flat container on hand to catch the water Carrying out an emergency emptyingSupply first When the water is completely drainedUnlock feature Emergency unlocking of the doorTo set the additional rinse To cancel the additional rinseAdditional rinse cycle RINSE+ Helpful to rinse with extra waterTo set the water cooling function To cancel water coolingWater cooling Additional rinse cycle and water coolingVariomatic spin To cancel Variomatic SpinTo set Variomatic Spin Cancelling the Programme Protection Setting the Programme ProtectionProgramme Protection Started Child Safety FeatureCancelling the child safety feature Washing programme can beInstallation Safety Precautions Installation and connection instructionsRemove transport packaging Installation of the applianceWhen transporting the unit with a sack trolley Transporting the applianceCover the hole with the cap C Are supplied with itInstallation on a Suspended Floor Installation-Site preparationLevelling the appliance Measures not be observed Electrical ConnectionEarth Blue Neutral Brown Live User Water connectionPermanent Connection TerferenceWater pressure Inlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions in mm Technical DataDimensions Height adjustment About +10/-5mmGreat Britain Warranty conditionsPage Index Customer Care Service & Spare Parts0870 5 929 Help us to help you PNCAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG