AEG 64819 manual Setting the delay timer, Starting a programme, Select the programme

PRE WASH

Warm pre-wash before the main wash that follows automatically; with intermediate spin for COTTONS/LINEN and EASY-CARES, without inter- mediate spin for DELICATES.

STAIN

For heavily soiled or stained washing. Stain removal agent will be rinsed into the wash at the optimum point in the programme.

Can only be set for wash temperatures of 40°C and upwards as stain re- movers only become effective at higher temperatures.

Setting the delay timer

3 Using the DELAY TIMER button you can delay the start of a programme by 30 minutes (30') to a maximum of 23 hours (23h).

1.Select the programme.

2.Press the DELAY TIMER button repeatedly until the desired start delay is shown in the multi-display, e.g. 12h to delay the start of the pro- gramme by 12 hours. The DELAY TIMER indicator will illuminate.

3 If the display is showing 23h and you press the button again, the time delay will be cancelled. 0’ will appear followed by the length of the wash programme that has been set.

3.To activate the delay timer, press the START/PAUSE button. The time re-

maining to the start of the programme will be continuously shown (e.g. 12h, 11h, 10h,... 30' etc.).

Starting a programme

1.Check that the tap is turned on.

2.Select a programme.

3.Press the START/PAUSE button. The programme is started, or will start after the delay timer has counted down.

3 If after pressing the START/PAUSE button E40 flashes in the multi-dis- play, the END indicator flashes 4 times and at the same time an acous- tic signal sounds 4 times, the door has not been correctly shut. Push the door firmly closed and press the START/PAUSE button again.

14