AEG 64819 Safety information concerning installation, This washing machine cannot be built-in

Page 27

Installation and connection instructions

1Safety information concerning installation

This washing machine cannot be built-in.

Before using for the first time, check the appliance for damage sus- tained while it was being transported. Do not under any circumstanc- es connect an appliance that is damaged to the mains. In the event of damage to the appliance contact your supplier.

Be sure to remove all the components of the transport lock before us- ing the appliance for the first time. Otherwise when spinning damage may be caused to the appliance or to neighbouring units or furniture.

Before using the appliance for the first time, splash protection must be completed. (See “Removing transit packaging”).

Always plug the mains plug into a correctly installed shockproof socket.

If hard-wired: hard-wiring to the mains may only be carried out by an a qualified electrician.

Prior to using the appliance for the first time, ensure that the rated voltage and current on the rating plate match the mains voltage and current where the appliance is to be installed. The required fuse pro- tection is also to be found on the rating plate.

If work on the plumbing is required for the proper connection of the washing machine to the water supply, this must be undertaken by a registered plumber.

If work on the electricity supply system is required for the proper connection of the washing machine to the electricity supply, this must be undertaken by a registered electrician.

The washing machine’s mains cable must only be replaced by a Service Force Engineer

27

Image 27
Contents Lavamat Dear Customer Following symbols are used in the textContents Guarantee/Customer Service Safety information concerning installationGeneral safety SafetyPrior to using the appliance for the first time Child safetyResulting overheating may constitute a fire hazard Control panel Description of the applianceRefresh Programme overviewApplication/Features Care Symbols1 Sorting washing Before the first washPreparing and sorting washing Preparing washingOpen the door pull the handle on the door Running a wash cycleOpening the door/loading washing Adding detergent /conditionerSwitching on the appliance/selecting a programme If you are using liquid detergentWashing powder/tablets for the main wash cycle Changing the spin speed/selecting rinse hold Selecting additional programmesShortened wash programme for lightly soiled items Setting the delay timer Starting a programmeSelect the programme Adding washing Programme sequenceInterrupting a programme/adding washing Interrupting a programmeIf Rinse Hold has been selected End of the wash cycle/removing the washingDeactivating the child safety device Child safety deviceWashing drum Cleaning and maintenanceCleaning procedure Detergent dispenser drawerDoor and rubber collar Remedying small faults yourselfClean the glass in the door and the rubber collar regularly What to do ifE10 appears Tap is shut off Turn on the tap END indicator is Conditioner has not Softener insert There are white residues on the washing If the wash result is not satisfactoryThere are grey stains on the washing Foam can still be seen following the final rinseCarrying out an emergency drain When the water has all drained awayDrain pump Disposal Packaging materialOld appliance Consumption values Technical dataThis washing machine cannot be built-in Safety information concerning installationUnpacking Installing the applianceWhen using a sack trolley to transport the washing machine Transporting the appliancePage Remove the bracket D Tighten up the six smaller bolts C Where to install Making the appliance level Brown Live Wire coloured green and yellowEarth symbol E or coloured green and yellow Electrical ConnectionPermanent Connection Open the porthole and extract the inlet hose Connecting to the water supplyPermitted water pressure Water inletWater Drainage From your Service Force Centre Pumping heights of over 1 metreFor drainage into an outlet Great Britain Guarantee/Customer ServiceOtros puntos de Postventa en el extranjero Further after-sales service agencies overseasAutres agences étrangères assurant le service après-vente Weitere Kundendienststellen im AuslandAustralia Korea South Namibia Japan Singapore Slovenia LU4 9QQ European GuaranteeMagyarország +36 Major Appliances 0870 5 929Customer Care For general enquiries concerning132 978 Subject to change without notice