AEG 64819 manual What to do if, Door and rubber collar, Remedying small faults yourself

Page 19

Door and rubber collar

Regularly check whether deposits or foreign bodies are present in the folds of the rubber collar or on the inside of the glass door.

Clean the glass in the door and the rubber collar regularly.

What to do if...

Remedying small faults yourself

If during use of the appliance one of the following error codes is shown in the multi-display:

–E10 (Problems with the water inflow),

–E20 (Problems with the water outflow),

–E40 (door open),

please consult the following table.

After the error has been remedied, press the START/PAUSE button.

In the event of other errors (E and a number or letter): Switch the ap- pliance off and then on again. Set the programme again. Press the START/PAUSE button.

If the error appears again, please contact your local Service Force Cen- tre, stating the error code.

	Problem	Possible cause	Remedy
		Power plug not plugged in	Connect the plug to a mains
		or problem with the fuse.	socket. Check the fuse.
	Washing machine does	The door is not shut proper-	Close the door until the lock
	Washing machine does	ly.	audibly clicks into place.
	not work.	ly.	audibly clicks into place.
	not work.
		The START/PAUSE button	Press the START/PAUSE but-
		was not pressed for long	ton for a longer period of
		enough.	time.
	The door cannot be	The child safety device is ac-	Deactivate the child safety
	closed.	tivated.	device:
	When you press a but-	The selected function can-	Select another function.
	ton Err appears in the	not be used together with	Select another function.
	multi-display.	the wash programme set.
	E40 appears.
	The END indicator is
	flashing 4 times, and si-	The door is not closed prop-	Close the door properly. Re-
	multaneously an acous-	erly.	start the programme.
	tic signal is sounding 4
	times.

19

Image 19

Contents Lavamat Dear Customer Following symbols are used in the textContents Guarantee/Customer Service Safety information concerning installationGeneral safety SafetyPrior to using the appliance for the first time Child safetyResulting overheating may constitute a fire hazard Control panel Description of the applianceRefresh Programme overviewApplication/Features Care Symbols1 Sorting washing Before the first washPreparing and sorting washing Preparing washingOpen the door pull the handle on the door Running a wash cycleOpening the door/loading washing Adding detergent /conditionerIf you are using liquid detergent Switching on the appliance/selecting a programmeWashing powder/tablets for the main wash cycle Selecting additional programmes Changing the spin speed/selecting rinse holdShortened wash programme for lightly soiled items Starting a programme Setting the delay timerSelect the programme Adding washing Programme sequenceInterrupting a programme/adding washing Interrupting a programmeIf Rinse Hold has been selected End of the wash cycle/removing the washingDeactivating the child safety device Child safety deviceWashing drum Cleaning and maintenanceCleaning procedure Detergent dispenser drawerDoor and rubber collar Remedying small faults yourselfClean the glass in the door and the rubber collar regularly What to do ifE10 appears Tap is shut off Turn on the tap END indicator is Conditioner has not Softener insert There are white residues on the washing If the wash result is not satisfactoryThere are grey stains on the washing Foam can still be seen following the final rinseCarrying out an emergency drain When the water has all drained awayDrain pump Packaging material DisposalOld appliance Consumption values Technical dataThis washing machine cannot be built-in Safety information concerning installationUnpacking Installing the applianceWhen using a sack trolley to transport the washing machine Transporting the appliancePage Remove the bracket D Tighten up the six smaller bolts C Where to install Making the appliance level Brown Live Wire coloured green and yellowEarth symbol E or coloured green and yellow Electrical ConnectionPermanent Connection Open the porthole and extract the inlet hose Connecting to the water supplyPermitted water pressure Water inletWater Drainage Pumping heights of over 1 metre From your Service Force CentreFor drainage into an outlet Great Britain Guarantee/Customer ServiceOtros puntos de Postventa en el extranjero Further after-sales service agencies overseasAutres agences étrangères assurant le service après-vente Weitere Kundendienststellen im AuslandAustralia Korea South Namibia Japan Singapore Slovenia LU4 9QQ European GuaranteeMagyarország +36 Major Appliances 0870 5 929Customer Care For general enquiries concerning132 978 Subject to change without notice