35.292.805…Lavamat 3085 UK doc. 10/03/2003 12:22 Página 62
Cleaning and maintenance
• Put the cap back on the emergency emptying hose and place the latter back in its seat.
• Screw the pump cover fully in.
• Close the pump door.
P1117
Warning
When the appliance is in use and depending on the programme selected there can be hot water in the pump circuit. Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When replacing the pump cover, after a cleaning inspection, ensure it is securely retightened so as to stop leaks and young children being able to remove it.
Cleaning the water inlet filter(s)
If your water is very hard or contains traces of lime deposit, the water inlet filter(s) may become clogged.
It is therefore a good idea to clean them from time to time.
Turn off the water tap(s). Unscrew the water inlet hose(s). Clean the filter(s) using a hard bristle brush.
Tighten up the inlet hose(s).
62