35.292.805…Lavamat 3085 UK doc. 10/03/2003 12:22 Página 73
Installation
Unpacking
All transit bolts and packing must be removed before using the appliance.
Using a spanner, unscrew and remove the rear
Remove the polystyrene block from the bottom of the machine and release the two plastic bags by removing the adhesive strip.
Carefully remove
the
Set the machine upright and remove the two remaining bolts from the back.
Pull out the three plastic spacers from the holes into which the bolts were fitted.
Plug the open holes with the plugs which you will find in the envelope containing the booklet.
You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again.
73