AEG 1850 Installation of the appliance, Transporting the appliance, Remove transport packaging

Page 55

Installation of the appliance

3 Washing machines with curved panels are not suitable for installing under units.

Transporting the appliance

•Do not place the washing machine on its front or on its right side (viewed from the front). Otherwise, electrical components can get wet.

•Never transport the unit without the transport safeguard. Do not re- move the transport safeguard until the appliance is at the installation location. Transporting the unit without the transport safeguard can damage it.

•Lift the appliance neither by an open filling door nor by the base.

When transporting the unit with a sack trolley:

•Attach the sack trolley only at the side. The sack trolley shovel must not be longer than 24 cm, otherwise the float switch can be de- stroyed.

Remove transport packaging

Important! It is essential to re- move the transport packaging be- fore putting the appliance into operation. Keep all parts of the transport packaging in a safe place for future use.

1. Open both hose holders on the appliance's rear side and remove the hoses and mains cable.

55

Image 55

Contents ÖKO-LAVAMAT Dear customer Following symbols are used in the textPlease read these user information carefully Contents Changing the language Anti-flood system Aqua Control + Aqua AlarmInstallation and connection instructions Before Using for the First Time SafetyCorrect Use General Safety Child SafetyDisposing of your old appliance DisposalEnvironmental Tips Disposing of the Packaging MaterialPossible languages will appear in the right of the display Turn the appliance on byFront view Description of applianceDrawer for detergent and conditioner Control panel with display Information panelOff. When the appliance is Main control featuresSwitching the appliance on and off Cancelling settingsControl knob and pages Navigation displayLevel Options Buttons and levelsFirst set the programme level 1, then the option level Level Extras Setting a programme an examplePress the Start button. The wash programme will start Tion has been activated Will appear in the symbol rowSilk H handwash Overview of functionsProgrammes level Wash programmes Woollens H handwash40-60 MIX Special programmesOptions level Extras level Delay StartHowever be helpful to use More water when rinsingSorting and preparing a wash load Preparing a Wash LoadTypes of washing and care symbols Water softener How much washing detergent and care agent?Water hardness details Before the first wash Setting the timeCarrying out a wash programme prior to first use Opening and closing the door Performing a wash cycleLoading the washing Adding detergent/conditioner Adding detergents/conditionersCompartment for liquid conditioners centre front If using liquid detergents/tablets Setting a wash programmeDelay Start option can be set at 30-minute inter- vals Set the options, e.g. Delay StartStarting a wash programme If a delayed start has been setChanging the spin speed Cancelling the programmeWash programme progress Moisture/LoadingShort spin or drain When the wash programme is completeFor rinse hold SpinAmount of washing loaded the next time you wash Overdosing indicatorUnloading the washing If Overdosing is shownMemory Saving a programme settingSaved programme set If Memory is highlighted Press the Select buttonHighlight Memory Press the Clear button Saved programme has Cancelling a saved programme settingNow been cancelled Use the control knob toChanging the language Select English Back DEUTSCH§ ITALIANO§ FRANÇAIS§ Extras Control panel Cleaning and CareDetergent Drawer Main door Washing DrumFollows What to do ifRemedying a malfunction If Attention / PleaseStart button was Screw the inlet hose Tion CD 1 / Please Outlet hose is kinked Straighten the hose Washing has not If there are white remnants on the washing If the washing results are not satisfactoryIf there are still grey spots on the washing If at the end of the last rinse foam is still visibleCarrying out emergency drainage Drain pump When the water is completely drainedWhat does Update mean? Anti-flood system Aqua Control + Aqua AlarmClose the flap Setting the child safety feature Child Safety FeatureCancelling the child safety feature Consumption values Consumption values and load sizesWash programme Type of fabric Load size in kg1 Load sizesInstallation Safety Precautions Installation and connection instructionsRemove transport packaging Installation of the applianceWhen transporting the unit with a sack trolley Transporting the appliancePage Installation on a concrete base Prepare the installation placeCompensate for floor unevenness Installation on vibrating floorsWater connection Electrical connectionPermissible water pressure Water inflow Water drain-off inside a basin Water drainDelivery heads over 1m Water drain-off inside a siphon= 0.1 1.0 Mpa Technical dataDimensions Dimensions in mmSchweiz Suisse Svizzera Customer ServicesPage Page Index When do you incur costs even during the warranty period? ServiceAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG