AEG 47380 manual User information Symptom Cause

User information

Symptom	Cause
The washing cycle is much	•	the water inlet is blocked,
too long	•	there was a power supply failure or the
		water was cut off,
	•	the motor temperature safety device
		tripped,
	•	the water inlet temperature is lower
		than normal,
	• the foam detection safety system trip-
		ped (too much detergent) and the
		washing machine evacuated the foam,
	• the anti-unbalance mass safety device
		tripped, an additional phase was
		added to distribute the washing in the
		drum better.
The «End» light** flashes 4	•	the cover is not correctly closed.
times and the error code
E40 appears in the display
window
The «End» light** flashes 2	•	the drain filter is blocked,
times and the error code	•	the drain pipe is blocked or kinked,
E20 appears in the display	•	the drain pipe is too high (see «instal-
window		lation»),
	• the drain pump is blocked,
	• the installation siphon is blocked.
The «End» light** flashes 1	•	the water tap is closed,
time and the error code	•	the water network has been cut off.
E10 appears in the display
window
The «End» light** flashes 10	•	the flaps of the drum door are opened.
times and the error code
EA0 appears in the display
window

28