User information
Leveling
Precise leveling will prevent vibrations, noise and movements of the washing machine during operation.
Water inlet
Make the washing machine level by adjusting the leveling screw that is too short.
Unscrew the stand and locking collar assembly (lift the washing machine if necessary).
When the washing machine is stable, maintain the stand on the ground and turn the locking collar as far as possible.
The
against the damages caused by the water. Indeed, the water inlet worns away by time and it can so deteriorate. In this case, the «aqua- stop» prevents the water from going into the appliance.
The problem is indicated by the appearance of
a red mark in the window «A». Close the water inlet tap and call the After Sales Service.
Screw the supply pipe connector onto the water inlet tap (20x27 mm).
Open the water inlet tap.
You cannot prolong the water inlet pipe. If it is too short, call the After Sales Service.
33