Specifications
Washer | Topload | Frontload |
| UWT821 | FTUA1 |
Width - in (mm) | 25 5/8" (651) | 26 7/8" (683) |
|
|
|
Depth - in (mm) | 28" (711) | 28" (711) |
|
|
|
Height - in (mm) | 43" (1092) | 41 3/8" (1054) |
|
|
|
Height to Work Surface - | 36" (914) | 41 3/8" (1054) |
in (mm) |
|
|
|
|
|
Operation | Manual Control | Manual Control |
|
|
|
Basket Volume - | 2.8 (79) | 2.84 (80) |
cu. ft. (liters) |
|
|
|
|
|
Spin Speed - RPM | High Speed 710 | 500, 650, |
| Low Speed 473 | 1000 |
|
|
|
Water Temperatures | Hot, Warm and Cold | Hot/Cold, Warm/Warm |
|
| Warm/Cold, Cold/Cold |
|
|
|
Cycles | Normal, Permanent Press | Regular, Permanent Press, |
| or Delicate | Delicate, Rinse and Spin |
|
| or Spin |
|
|
|
Cycle Time | 27 minutes | |
| plus fill time | plus fill time |
|
|
|
Water Pressure - | Pressure fill 20 to 120 | Pressure fill 20 to 120 |
psi (bar) | (1.4/8.3) | (1.4/8.3) |
Cycle Cue Lights | Yes | Yes |
|
|
|
Top and Lid Finish | Porcelain | Porcelain |
|
|
|
Color | White | White |
|
|
|
Motor | ||
Motor | for 1725 or 1140 RPM |
|
|
| |
|
|
|
Electrical Specifications | ||
|
|
|
Net Weight (Approx.) - | 190 (86) | 240 (109) |
lb (kg) |
|
|
Dom. Shipping Weight | 210 (95) | 260 (118) |
(Approx.) - lb (kg) |
|
|
|
|
|
Agency Approvals | UL | UL, CULUS |
|
|
|
Strong Limited Parts Warranty
UniMac proudly offers the following limited warranties on its topload washer: Through Three Years* — any part on the entire machine.
Through Five Years* — the transmission assembly. Through Lifetime* — the stainless steel washtub.
UniMac proudly offers the following limited warranties on its frontload washer: Through One Year* — any part on the entire machine.
UniMac proudly offers the following limited warranty on its commercial dryer: Through Three Years* — any part on the entire machine.
* Parts only, labor not included. See UniMac Warranty Bond for specifics.
Dryers | Single Rear Control | Single Front Control | Stack | ||
| UDE807 (Electric) | FEU17 (Electric) | USE807 (Electric) | ||
| UDG809 (Gas) | FGU17 (Gas) | USG809 (Gas) | ||
|
|
|
|
|
|
Width - in (mm) | 26 7/8" (683) | 26 7/8" (683) | 26 7/8" (683) | ||
|
|
|
|
|
|
Depth - in (mm) | 28" (711) | 28" (711) | 28" (711) | ||
|
|
|
|
|
|
Height - in (mm) | 43" (1092) | 41 3/8" (1054) | 76 5/8" (1946) | ||
|
|
|
|
|
|
Height to Work Surface - | 36" (914) | 41 3/8" (1054) | N/A | ||
in (mm) |
|
|
|
|
|
|
|
|
|
|
|
Cylinder Volume - | 7.0 (198) | 7.0 (198) | 7.0 (198) | ||
cu. ft. (liters) |
|
|
|
|
|
Color | White | White | White | ||
|
|
|
|
|
|
Motor HP | 60 Hz: 1/3 HP, 5.5 amp | 60 Hz: 1/3 HP, 5.5 amp | 60 Hz: 1/3 HP, 5.5 amp | ||
|
|
|
|
|
|
Motor RPM | 60 Hz: 1725 | 60 Hz: 1725 | 60 Hz: 1725 | ||
|
|
|
|
|
|
Btu Per Hour | 25,000 (6,300 kcal) | 25,000 (6,300 kcal) | 25,000 (6,300 kcal) | ||
|
|
|
|
|
|
Electrical Requirements | Gas: | Gas: | Gas: | ||
| 120/60/1 - 15 amp | 120/60/1 - 15 amp | 120/60/1 - 15 amp | ||
| Electric: | Electric: | Electric: | ||
| 120/240/60/1 - 30 amp | 120/240/60/1 - 30 amp | 120/240/60/1 - 30 amp | ||
| 120/208/60/1 - 30 amp | 120/208/60/1 - 30 amp | 120/208/60/1 - 30 amp | ||
Heating Element | 60 Hz: 5350W, 240V | 60 Hz: 5350W, 240V | 60 Hz: 5350W, 240V | ||
(Electric) | Also 4750W, 208V | Also 4750W, 208V | Also 4750W, 208V | ||
|
|
|
|
|
|
Type of Gas | |||||
(Gas models only) | natural/mixed gas | natural/mixed gas | natural/mixed gas | ||
| Convertible to LP gas* | Convertible to LP gas* | Convertible to LP gas* | ||
|
|
|
|
|
|
Utility Connections - | 3/8" NPT (9.5) | 3/8" NPT (9.5) | 3/8" NPT (9.5) | ||
in (mm) |
|
|
|
|
|
Air Outlet Diameter - | 4" (102) | 4" (102) | 4" (102) | ||
in (mm) |
|
|
|
|
|
Exhaust Airflow** | 220 (105 liters/sec.) | 220 (105 liters/sec.) | 220 (105 liters/sec.) | ||
|
|
|
|
|
|
Net Weight (Approx.) - | Gas: 140 (64) | Gas: 155 (70) | Gas: 275 (125) | ||
lb (kg) | Electric: 135 (61) | Electric: 150 (68) | Electric: 265 (120) | ||
Dom. Shipping Weight | Gas: 150 (68) | Gas: 165 (75) | Gas: 290 (132) | ||
(Approx.) - lb (kg) | Electric: 145 (66) | Electric: 160 (73) | Electric: 280 (127) | ||
|
|
|
|
|
|
Agency Approvals | UL, CSA | UL, CSA | UL, CSA | ||
|
|
|
|
|
|
|
|
|
|
| |
Stack Washer/Dryer | LTUA7 (Electric) |
|
|
| |
|
| LTUA9 (Gas) |
|
|
|
|
|
|
|
|
|
Width - in (mm) |
| 26 7/8" (683) |
|
|
|
|
|
|
|
|
|
Depth - in (mm) |
| 28" (711) |
|
|
|
|
|
|
|
|
|
Height - in (mm) |
| 75 1/4" (1911) |
|
|
|
|
|
|
|
|
|
Color |
| White |
|
|
|
|
|
|
|
|
|
Net Weight (Approx.) - |
| Gas: 355 (161) |
|
|
|
lb (kg) |
| Electric: 350 (159) |
|
|
|
|
|
|
|
|
|
Dom. Shipping Weight |
| Gas: 385 (175) |
|
|
|
(Approx.) - lb (kg) |
| Electric: 380 (172) |
|
|
|
|
|
|
|
|
|
Agency Approvals |
| UL, CSA |
|
|
|
|
|
|
|
|
|
*IMPORTANT: Any product revisions or conversions must be made by the Manufacturer’s Authorized Dealers, Distributors, or local service personnel. Any approvals may vary depending on configuration.
Consult factory for details.
**Measured at point of exit from dryer. Maximumexhaust static back pressure: 60 Hz: 0.6" W.C. Gas models are certified by CSA International; electric models are Underwriters Laboratories certified.
For the most accurate information the installation guide should be used for all design and construction puroposes. Due to continuous product improvements, design and specifications are subject to change without notice. The quality management systems at all Alliance Laundry Systems manufacturing facilities have been registered as ISO 9001:2000 compliant. Features and certifications may vary by model.
©Copyright 2007 Alliance Laundry Systems LLC
Printed in the U.S.A.
Printed on paper manufactured with virgin pulp from
certified sources and a minimum of 10%
recovered fiber.
www.uniwash.com
Alliance Laundry Systems
® Shepard Street, Ripon, WI 54971 Telephone: