Toshiba Official Guide for Washing Machine Manual

Page 15

BEFORE CALLING THE SERVICEMAN

The following are not malfunctions.

When:

Check:

 

 

The first time you use your washing machine,

This is merely water lift over from the performance inspection performed

a small amount of water may drain out of the

on your washing machine before it was shipped from the factory.

drainage hose.

 

 

 

During operation the control panel gets warm.

Because of the electronic parts radiate heat.

 

 

The pulsator rotates bit by bit.

Because of preventing the laundry unbalancing, it rotates bit by bit.

 

 

During washing and rinsing, lamps flickers.

It is the cause of the power source wiring in a house. If fluorescence light

 

be changed, it may improve condition.

 

 

During spinning, suddenly supplying the

Because load unbalance occurred and safety switch operated. The spin

water or rinsing.

will cycle resume after supplying water, rotating and correcting the

 

unbalanced load.

 

 

Sloshing sounds of remaining water coming

They are made by water retained by the machine for the purpose of

from your washing machine after SPIN cycle

maintaining balance and do not indicate malfunction.

has been completed.

 

 

 

Spin extraction is not enough.

Spinning rate of fully automatic washing machine is lower than that of

 

twin tub washing machine. Sometimes spinning is uneven like thick parts

 

of blanket.

 

 

After pausing the machine during the spin

There are a short pause before the machine begins to spin as the

cycle, it will not starts immediately.

drainage valve opens sufficienty.

 

 

If operates the machine at spinning on and

You may hear intermittent motor sound ("coon" sound) in spinning

off.

process occurs, this is a sound which occurs in order to control rotation,

 

and not a malfunction.

 

 

After water supply shut off or water with iron

Wait for water becomes clean. Returning type bleach can be used

rust appears.

(hydrohiter etc.) when iron rust adhered to the white colored clothes. Avoid

 

using the bleach for colored articles.

 

 

The buzzer does not stop.

If the CHILD PROOF mode is set to ON, and the lid is opened while the

 

machine is in operation, the buzzer beeps. Check inside the washing

 

machine. Press POWER to turn it off.

 

 

HANDLING METHOD FOR EMERGENCY

When the machine takes on abnormal operation, please disconnect the power plug and send it to our service agency for handling. Never disassemble the machine by yourself, for safety reasons.

SPECIFICATIONS

Type

Fully automatic washer

Rated period of operation

Regular cycle 43 min.

 

 

 

 

Washing

Vortex type

Standard amount of water

45L high water level

system

 

 

Standard water consumption

98L

 

Overall

563 (Width) x 535 (Depth) x 920 (Height)

Rated capacity

6.5kg

dimension

(Dry clothes weigth)

 

 

 

 

Weight

27kg

Water tap pressure

0.03~1MPa

 

 

 

 

15

6348100701 (11-15)

15

22/10/08, 11:19

Image 15
Contents AW-7480EM ContentsDo not place flammable materials in the basket Do not damage the electrical power cordNever disassemble or modify the machine Never use damaged electrical cords or plugs or loose socketDescription of Parts Do not pull the cord when unplug the applianceDo not use water with temperatures over 50C AccessoriesPress the button Auto-Set ModeButton Setting Description and Operation of Panel PartsHow to use preset mode Preset ModeHOW to Operate If you wish to turn off the end buzzer soundRegular Soak Speed Heavy Delicate Washing of Blanket Custom Wash Cycles If you wish to change the shower rinse to the static rinseOverflow Rinse cycle Recommended detergent amount When using liquid detergent and bleachWhen using softener Laundry GuideWashing machine body and panel MaintenanceCleaning the tub Softener caseInstallation InstallationChoosing an installation location Installing the bottom coverDrainage hose extension Installing the ground pinInstalling the drainage hose Moving the hookAttaching the water supply hose to the faucet If the filling water becomes not goodCase of water may freeze When Check Treatment Before Calling the ServicemanSpecifications Following are not malfunctions When CheckHandling Method for Emergency Manufactured by