Before Calling the Serviceman

WHEN	CHECK	TREATMENT

does not operate	• Is there a power outage?	Please confirm whether a power failure or fuse
	• Is the circuit breaker or fuses cut off?	breaker is cut. Then draw out power supply
	• Is the machine’s plug properly inserted into	plug, insert once again and turn the power
	an AC socket?	switch on.
	• Is the power switch ON?

making noise	• Is there the inclination of the laundry?	Please correct the inclination or non stability
	• Is your washing machine installed on an	of laundry in the washing machine.
	inclined or uneven surface?

	• Are there match sticks, hairpins or metal	Remove them.
	objects being washed with the laundry?

	• Is there a foreign object caught under the	Remove the center screw, lift the pulsator out
	pulsator?	and remove the foreign object.

	• Groan sounds during water supply.	Water intake valve buzzes.

water leak	• Is the faucet shape suited?	Adjust the inside ring of the hose union or
		change faucet shape (Refer to p.13)

	• Are the hose coupling and the nozzle loose?	Re-attaching the water (Refer to p.13)

	• Is the water inlet nut loose?	Re-attaching the water supply hose (Refer to
	• Is the water supply hose connector clogged?	p.13)

does not beep the	• If you turn the power on and press START	Reset the end buzzer sound to turn on refer-
end buzzer	pad immediately, it may not beep the end	ring to "If you wish to turn off the end buzzer
	buzzer.	sound. (p. 6)"
	• Is the end buzzer turned off?

In the case the buzzer sounds and the select display flash alternatively.

The display of "LINEAR WATEL LEVEL" indicates the error condition as shown below.

WHEN	CHECK	TREATMENT
	• Is the drainage hose properly connected to the machine?	Open and close the lid once and
	• Is the drainage hose bent?	then press the START button.
	• Is the drainage hose laid down?

•Is the drain water frozen?

•Is the outlet of the drainage hose sunk in water?

•Is the drainage hose clogged?

• Is there not the inclination of the laundry?

Please repair the inclination of a

• Is your washing machine installed on an incline or uneven

washing machine and non

surface?

stability of a washing machine.

Then close the lid.

• Is the water faucet turned on?

Open and close the lid once and

• Is the water supply frozen or shut?

then press the START button.

• Is the inlet net of the water intake valve choked with dust?

• Is the lid opened?

Close the lid.

6348100701 (11-15)

28/10/08, 10:12

BEFORE CALLING THE SERVICEMAN