Splendide 7100XC manual Cleaning the pump pre-chamber, No lint filter to clean

Page 21

Cleaning the pump pre-chamber

The washer-dryer is fitted with a self-cleaning pump that does not require regular maintenance. However, if small items (such as coins or buttons) fall into the pre-chamber that protects the pump, you will need to retrieve them.

IMPORTANT: Before cleaning, make sure the wash cycle has ended and unplug the appliance.

To access the pre-chamber:

1Using a screwdriver, remove the cover panel on the lower front of the washer-dryer.

2Place a small dish or tray below the cover. Unscrew the pre-chamber by rotating it counter clockwise. A little water may trickle out. This is perfectly normal.

3Clean the interior thoroughly.

4Screw the pre-chamber back on.

5Reposition the panel, making sure the tabs are positioned correctly before you push the panel back onto the appliance.

No lint filter to clean

Your Splendide removes the lint automatically with the help of it’s self-cleaning pump, so there’s no lint filter to clean.

Care and maintenance 21

Image 21
Contents Contents General Information Technical information Read all instructions before using any appliance For Your SafetyIntroduction CongratulationsRead this manual For your recordsElectrical Shock Hazard Installation RequirementsLocation ElectricalDrainage Outlet End of Drain Hose provided with the unitConnecting the water inlets Installing the washer-dryerUnpacking the washer-dryer Removing the transit screwsFloor Standpipe Connecting the drain hoseLeveling the washer-dryer Testing and cleaning the washer Completing the installationDo not Open About your washer-dryerDescription of the control panel Description of the Program Key Description of the Option ButtonsAbout the Dispenser Drawer Laundry Aid Type / AmountsWashing and drying Cycle Description ChartMaximum DRY Cycle capacity 8 to 11 lbs Maximum Wash Cycle capacity CottonsSelect the wash cycle Select the dry timeFor best results Splendide laundry tipsCombine large and small items in one full Wash cycles are 30 to 96 minutesCombo laundry FAQ’s Sample wash-to-dry loadsSample Load Care and maintenance Cleaning the pump pre-chamber No lint filter to cleanTo access the pre-chamber Unit has entered diagnostic mode and there may be a problem TroubleshootingHours Mon-Fri 7AM-5PM PST Local Phone If you need assistance