White-Westinghouse Washer manual Hot water is being used elsewhere in the house

Page 11

Residue left in tub. Wash load too wet after

spin.

Water does not enter

washer or if enters slowly,

POSSIBLE CAUSE

Washer is overloaded.

Load is out of balance.

Drain hose is kinked.

Water supply is not adequate in area.

Water supply faucets are not completely open.

Water is being used elsewhere in the house.

Do not overload washer. See Washing Procedures,

Rearrange load to allow proper spinning,

Straighten drain hose.

Check another faucet in the house, Wait until water supply and pressure increase,

Fully open hot and cold faucets.

Water pressure must be at least 30 psi (260 kPa), Avoid running water elsewhere while washer is filling,

Wafer level does nor Water inlet hoses are kinked. cover load,

Improper water level selection (for models with

water level!load size control).

Washer is overloaded.

Warm or hof water is not

Hot water heater is set too low or is a distance

hot enough,

from washer,

Hot water is being used elsewhere in the house.

Water in washer does not Drain hose is kinked or clogged. drain or drains slowly,

Water leaks,

Fill hose connection

at faucet

or washer.

 

 

House drain pipes are clogged.

 

 

 

Oversudsing,

 

 

 

 

Incorrect wash and rinse

Hot and cold

water

hoses are

connected

to

temperafures,

wrong supply

faucets,

 

 

Water is entering washer Drain hose standpipe is incorrect height. but tub does not fill,

Straighten hoses,

Select higher water level/load size.

Do not overload washer. When control is set at highest fill level, dry' load level should not be higher than top row of circular holes in wash tub.

Measure hot water temperature at nearby faucet

with candy or meat thermometer. Water temperature should be at least 130°F (70°C). Adjust water heater as necessary,

Avoid using hot water elsewhere before or during washer use. There may not be enough hot water available for proper cleaning. If problem persists, your hot water system may be unable to support more than 1 use at a time.

Clean and straighten the drain hose.

Check and tighten hose connections. Install rubber sealing washers provided.

Unclog drain pipes, Contact plumber if necessary'.

Use less detergent.

Connect hot water hose to hot water faucet and cold water hose to cold water faucet,

Standpipe must be a minimum of 33" (83,82 cm) high to prevent siphoning, See INSTALLATION INSTRUCTIONS.

11

Image 11
Contents WASttE Prevent Fire Read all instructions before using this washerRecord Your Model and Serial Register Your ProductDo not use or mix Liquid chlorine bleach with other Important SafetyBefore adding the laundry load Sort laundry into loads that can be washed togetherPrepare items for washing Add a measured amount of detergent to the wash tubIf desired, add fiquid fabric softener to Fabric Softener Add laundry load to washerFor successful stain removal Remove items when the cycle is completedChlorine bleach because it may intensify discoloration Common Washing Problems Winterizing Instructions InsideInstructionsforcold weather care OutsidePossible Cause Hot water is being used elsewhere in the house

Washer specifications

The White-Westinghouse Washer is renowned for its robust performance, reliability, and innovative features that cater to modern laundry needs. Known for their longevity, White-Westinghouse appliances have been trusted by families for generations, making it a popular choice in many households.

One of the standout features of the White-Westinghouse Washer is its advanced wash technology. Equipped with specialized wash cycles, this washer can handle a variety of fabric types and soiling levels. Users can select from pre-programmed cycles that include delicate, heavy-duty, and quick wash options, ensuring optimal cleaning while being gentle on clothes.

Energy efficiency is another hallmark of the White-Westinghouse Washer. Many models are ENERGY STAR certified, signifying reduced energy consumption without compromising on washing performance. This benefit not only assists in lowering utility bills but also contributes to a more eco-friendly home.

The capacity of White-Westinghouse Washers varies, allowing consumers to choose models that best suit their laundry volume. With larger drum sizes, these washers enable users to wash more clothes in a single load, thus saving time and resources. This is particularly advantageous for larger families or those who frequently have large loads to wash.

One of the technological innovations found in White-Westinghouse Washers is the Direct Drive Motor. This motor reduces mechanical wear and tear, resulting in quieter operation and increased durability. Coupled with advanced vibration control technology, these washers maintain stability during high-speed spin cycles, producing less noise and movement.

Additionally, the washers often feature user-friendly digital controls and display panels. These intuitive interfaces allow for easy selection of settings and cycles, enhancing the overall user experience. Many models also come equipped with smart technology that offers remote operation via smartphone apps, giving users the flexibility to manage laundry tasks from anywhere.

In summary, the White-Westinghouse Washer combines advanced technology with user-centric features, ensuring efficient and thorough cleaning while accommodating diverse laundry needs. With its focus on energy efficiency, durability, and ease of use, it remains a strong contender in the competitive appliance market, appealing to consumers seeking reliable performance and modern conveniences in their laundry routines.