Step 9
Install manifold bracket
You will need: manifold bracket
Hook the bracket onto the manifold at the center burner valve. Place your hand underneath the bracket. Lift the manifold, bracket and cooking box slightly and hook the tab of the bracket onto the frame brace. Figure 10.
Frame brace
Manifold bracket
Figure 10
Step 10
Install tank panel assembly
You will need: tank panel assembly,
Insert the tank panel tabs into the slots in the frame brace. Figure 11.
Slots in frame brace
Tank panel tabs
Figure 11
Slide tank panel up until notch at bottom of panel fits over the cross brace. Insert one bolt with washer through the hole in the bottom of the tank panel and through the wheel frame. Add hex nut and tighten with the 7/16 inch wrench. Figure 12.
Cross brace
Figure 12
14