range {[nodes] all }
Preselect or display the default set of nodes
If nodes or all is given, this directive modifies the default set of nodes all following directives will act on. nodes is given in the same syntax as within any other directive, i.e. a comma separated list of node ranges
If neither nodes nor all is given, the current preselected node set is displayed. Be aware of the fact that this might not be literally identical to the string given in a previous call to the range directive since the program tries to find a string as short as possible.
show { accounters user group maxproc selecttime psiddebug rdpdebug rdpretrans mcastdebug master freeOnSuspend handleOldBins nodesSort starter runjobs overbook rdppktloss rdpmaxretrans exclusive pinprocs cpumap bindmem adminuser admingroup rl_addressspace rl_core rl_cpu rl_data rl_fsize rl_locks rl_memlock rl_msgqueue rl_nofile rl_nproc rl_rss rl_sigpending rl_stack supplementaryGroups statusBroadcasts rdpTimeout deadLimit statusTimeout rdpClosedTimeout rdpResendTimeout rdpMaxACKPend } [nodes]
Show various parameters of the ParaStation system.
accounters [nodes]
Show information on which node(s) ParaStation accounting processes are running.
user [nodes]
Show who grants exclusive access on the selected node(s).
group [nodes]
Show which group grants exclusive access on the selected node(s).
maxproc [nodes]
Show the maximum number of ParaStation processes on the selected node(s).
selecttime [nodes]
Show the timeout of the central select(2) of the ParaStation daemon psid(8) on the selected node(s).
psiddebug [nodes]
Show the debugging mask of the ParaStation daemon psid(8) on the selected node(s).
rdpdebug [nodes]
Show the debugging mask of the RDP protocol within the ParaStation daemon psid(8) on the selected node(s).
rdpretrans [nodes]
Show the RDP retransmit counters off the selected node(s).
mcastdebug [nodes]
Show the debugging mask of the MCast protocol within the ParaStation daemon psid(8) on the selected node(s).
52 | ParaStation5 Administrator's Guide |