PAR Technologies V5 manual Debug=level, Configfile=file, Logfile=file

Options

-d , --debug=level

Activate the debugging mode and set the debugging level to level. If debugging is enabled, i.e. if level is larger than 0 and option -lis set to stdout, no fork(2) is made on startup, which is usually done in order to run psid as a daemon process in background.

The debugging level of the daemon can also be modified during runtime using the set psiddebug command of psiadmin(1).

Be aware of the fact that high values of level lead to excessively much debugging output spoiling the syslog(3) or the logfile.

-f , --configfile=file

Choose file to be the ParaStation configuration file. The default is to use /etc/ parastation.conf.

-l , --logfile=file

Choose file to be the destination for logging output. file may be the name of an ordinary file or stdin or stdout. The default is to use syslog(3) for any logging output.

-v , --version

Output version information and exit.

-? , --help

Show a help message.

--usage

Display a brief usage message.

See also

parastation.conf(5), psiadmin(1), mlisten(1)

64 ParaStation5 Administrator's Guide