Milnor KURSPK0025, KURSPK0026 guide

Danger From an Operating Press

CRUSH HAZARD—Devices in and above the press move without warning and can entangle, crush, or sever limbs on contact.

☞ NEVER touch or reach into assemblies in or above press frame unless power is locked OFF and tagged out, and then only for maintenance.

☞ALWAYS ensure all personnel are clear of the press and the receiving conveyor and all press side doors are closed and guards are in place before returning power to either machine.

☞DO NOT climb on press unless press power is locked OFF and tagged out.

Danger From Moving Conveyor

FALL HAZARD—The receiving conveyor starts without warning. Stand- ing or walking on the conveyor may cause you to fall or be entangled in or struck by moving system devices.

☞Lock OFF and tag out power at wall disconnect before servicing the receiving conveyor or press.

☞DO NOT stand or walk on the receiving conveyor or belt at the press discharge end when performing service or maintenance.

☞ALWAYS ensure all personnel are clear of press and receiving conveyor before returning power to either machine.