5.Select Fabric Selector (available settings vary by model). Follow garment manufacturer’s care labels for recommended temperature settings.
DRY2349N
6.Select optional EXTEND TUMBLE (available on select models) setting to continue tumbling items at no heat. This prevents wrinkling when garments cannot be removed from the dryer immediately. By pressing the EXTEND TUMBLE button to “ON,” the AUTOMATIC REGULAR/DELICATE and AUTOMATIC PERMANENT PRESS/KNITS cycles will tumble an additional 40 minutes.
DRY2029N
7.Select timer setting in cycle desired. These cycles control the drying time.
The ENERGY SAVER settings, marked with an asterisk (∗), show which dryer settings will use the least energy and will leave items damp for easier ironing.
8. Push timer knob in to start dryer.
NOTE: To stop dryer at any time, open the door or turn timer knob to an OFF position. To restart dryer, close door, reset timer if necessary, and push in the timer knob.
End of Cycle Signal (available on select models only)
The volume of the signal tone may be set on OFF, LOUD or between the two selections. If a volume level is selected, the signal will let you know when the cycle is done. The signal will stop when the door is opened, or when the timer is advanced to an OFF position.
DRY2350N
NOTE: The signal will come on every 10 minutes when the optional EXTEND TUMBLE setting is selected.
Optional Drying Rack
A drying rack, Part No. 512082, is available at extra cost through your Factory Authorized Service Center.
The drying rack can be used for
DRY2332N
DRY2332N
513218
© Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT