Speed Queen HVR-M15N/M15P manual Before Drying, Energy Saving Tips, Helps and Hints, Sort

Page 6

Before Drying

Energy Saving Tips

Make sure the lint filter is always clean.

Do not overload the dryer.

Do not overdry items.

Remove items to be ironed while still damp.

Large loads of similar fabrics dry the most efficiently. However, dry permanent press in smaller loads to prevent wrinkling.

Use the correct cycle for the type of fabric being dried.

Locate your dryer so the exhaust duct is as short and straight as possible.

Do not open the door during the drying cycle.

Plan to do your laundry on low humidity days; your clothes will dry faster.

Dry multiple loads of clothes one right after another so dryer interior does not have to be reheated for each load.

Helps and Hints

The directions for installation and proper exhausting are given in the Installation Instructions which are included with the dryer.

Static electricity may cause garments of synthetic fibers (as in lingerie) to cling together, especially if they are overdried. The use of a liquid fabric softener in the rinse water of the washer, or a fabric softener sheet in the dryer, will soften clothes and reduce static electricity.

Do not wash or dry clothes that shed lint in the same load with permanent press or knit garments.

Remove permanent press loads immediately after dryer stops.

Follow the care labels on FLAME RETARDANT, SCOTCH- GUARD™, etc., garments for the proper washing and drying.

If loads should be damp for ironing, turn timer knob to the ENERGY SAVER setting, marked with an asterisk (*), in AUTOMATIC or TIME DRY cycles.

Sort

If you have correctly sorted the items for washing, they should be properly sorted for drying too.

1.Sort by color.

2.Separate lint shedding fabrics and lint receiving fabrics.

Towels, flannels, chenille, cottons, rugs, etc., shed lint. Corduroys, knits (including socks), permanent press, and synthetics attract lint.

3.Separate no heat, low heat and high heat items.

In any kind of drying, lightweight fabrics will dry faster than heavyweight fabrics. If mixed loads are dried together (such as sheets and towels), remove the lighter weight fabrics when they are dry to prevent overdrying and wrinkling. The best method is to dry clothes which require the same time and temperature in the same load.

TLW1991N

TLW1991N

-6-

513218

© Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT

Image 6
Contents For your dryer WA R N I N G Safety Information Explanation of Safety MessagesImportant Safety Instructions 513218 513218 Helps and Hints Before DryingEnergy Saving Tips SortLoad Operating Your Dryer Available Drying CyclesTo Dry Clothes End of Cycle Signal available on select models only Optional Drying RackCare of Your Dryer MaintenanceLubrication Motor Overload ProtectorLint Filter Optional Control Knob InsertsTroubleshooting Dryer Symptom Possible Cause/SolutionContact Information Speed Queen Shepard Street Box Ripon, Wisconsin Phone