Roper EL4030V Models EL5030/GL5030, Select cycle and setting, Automatic Cycles, Timed Dry

Models EL5030/GL5030

(Check behind dryer door for model number)

selector

Model and

serial number

Select cycle and setting

A. Automatic Cycles

The automatic cycles let you select the degree of dryness you want. A thermostat senses the air temperature and automatically shuts the dryer off when the selected dryness is reached.

1.Use Auto-Sense Heavy to dry heavy and medium-weight cotton or linen items. The load tumbles without heat the last 5 minutes for easier load handling.

2.Use Auto-Sense Permanent Press to dry permanent press, knits and other synthetic items. The load tumbles without heat during the last 10 minutes to help prevent wrinkles and to make the load easier to handle.

If items are drier than you like, set the conizol to the right of Normal Dry the next time you dry that kind of load.

If the items are not as dry as you like, set the control to the left of Normal Dry the next time you dry that kind of load.

The cycle control knob will not move until the clothes load is almost dry, or the cool-down time of the cycle has been reached. After the cool-down cycle is finished, the cycle control knob automatically moves to OFF and the dryer stops tumbling.

B. Timed Dry

Use this cycle for drying a load for a set time between 10 and 60 minutes. To operate, turn cycle control knob to the number of minutes you want. Push the start button. (The last 5 minutes of this cycle are without heat to help make the load easier to handle and to reduce wrinkling.)

NOTE: Overdrying can cause shrinkage, static cling and damage to some fabrics.

C. Damp Dry

Use this setting to dry damp items or to dry items to damp level (for example heavy cottons such as jeans which you do not want to become stiff or cotton clothes which are easier to press when damp.)

KNITS/LOW and push the start button. The load will tumble in heated air for 15 minutes and without heat for 5 minutes more. For best results, put only a few items in the dryer and remove as soon as the dryer stops. Fold or hang on hangers immediately.

Select temperature setting

A. No Heat/Fluff

Use for rubber, plastic and heat- sensitive fabrics. (See chart on Page 3 for time settings.)

To operate, turn temperature selector to NO HEAT/FLUFF. Turn cycle control knob to TIMED DRYING and set the number of minutes you want.

Push the start button.

3.Adjusting the dryness levels. Set the cycle control knob to Normal Dry in the automatic cycle. When dryer stops, feel the items for dryness.

D. Wrinkle Free

Use this cycle to remove wrinkles from clothing that has been packed in a suitcase, closet or not removed promptly from dryer. To operate, turn cycle control knob to WRINKLE FREE; set the temperature selector knob to NOTE: Overdrying can cause shrinkage, static cling and damage to some fabrics.

B. Knits/Low

Use for medium/lightweight knits and delicate fabrics.

C. Cotton/Perm PressHigh

Use for cotton, linen, permanent press and heavyweight knit fabrics.

Page 5