Minolta DI2510, DI2010, DI3010 Administrator Settings, Administrator Management Operations Chapter

6.3 Administrator Settings 6

6.3Administrator Settings

Changing the administrator access code

This explains the method to specify or change the administrator access code.

To set the administrator access code

1Follow the procedure described in “To display the Administrator Management screens” on page 6-2 to display the Administrator Management screen.

2Touch [Admin. 1], and then touch [Admin. Set].

3Touch [Administrator Code Input].

4Use the 10-Key Pad to type in the administrator access code, and then touch [Enter].

❍To change an entered value, touch [←] and [→] to move the cursor to the desired position, and then type in the new value.

❍To erase the value at the cursor’s position, touch [Delete].

❍Press the [C] key to erase all entered text.

❍To return to the previous screen, touch [Cancel].

5Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen.

Administrator Management Operations Chapter 6

Di2010/Di2510/Di3010/Di3510 6-7