Minolta Di3510, DI2510, DI2010, DI3010 user manual Utility Mode Operations Chapter

Utility Mode Operations Chapter 5

5 5.3 Changing Default Settings

To set the “Density (ADF only)” function (Only when the duplexing document feeder is installed)

This function is used to adjust the density level when the optional duplexing document feeder is used.

1Press the [Utility] key.

2Touch [User’s Choice].

3Touch [6/6], and then touch [Density (ADF only)].

4Select the desired default setting, and then touch [Enter].

1 2

1:The setting on the left is most appropriate for scanning normal documents (such as those created with a word processor).

2:The setting on the right is most appropriate for scanning faint document (such as those written with pencil).

5Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen.

5-30 Di2010/Di2510/Di3010/Di3510