Minolta DI2010, DI2510 Utility Mode Operations Chapter, To set the “Sleep Mode Setting” function

Utility Mode Operations Chapter 5

5 5.3 Changing Default Settings

To set the “Sleep Mode Setting” function

This function is used to specify the period of time where there is no input, after which the copier automatically turns the printer heater off.

To display [No Reset], you need to first display [No Reset] in Specifying Administrator Settings. For details, refer to “Administrator Settings” on page 6-7.

1Press the [Utility] key.

2Touch [User’s Choice].

3Touch [3/6], and then touch [Sleep Mode Setting].

4Press the [C] key to erase the value.

❍Use the 10-Key Pad to specify the desired length of time, and then touch [Enter].

(Specify a length of time between 1 and 240 minutes.)

❍Selecting the [No Reset] key means that sleep functions will no longer operate.

5Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen.

5-16 Di2010/Di2510/Di3010/Di3510