Minolta Di3510 Installation Precautions, Precautions Chapter, Installation Site, Power Source

Precautions Chapter 3

3 3.1 Installation Precautions

3.1Installation Precautions

Installation Site

To ensure utmost safety and prevent possible malfunctions, install the copier in a location that meets the following requirements.

-A location away from curtains, etc. that may catch fire and burn easily

-A location that is not exposed to water or other liquids

-A location free from direct sunlight

-A location out of the direct airflow of an air conditioner or heater, and not exposed to extremely high or low temperatures

-A well-ventilated location

-A location that is not exposed to high humidity

-A location that is not extremely dusty

-A location not subjected to undue vibrations

-A stable and level location

-A location where ammonia or other organic gases are not generated

-A location that does not put the operator in the direct airflow of exhaust from the copier

-A location that is not near any kind of heating devices

Power Source

The power source requirements are as follows.

Voltage fluctuation: Maximum ±10% (127 V: +6%, –10% )

Frequency fluctuation: Maximum ±0.3 Hz

❍Use a power source with as little voltage or frequency fluctuations as possible.

3-2 Di2010/Di2510/Di3010/Di3510