5.4 Registering an Image Stamp
5.4Registering an Image Stamp
5
Before the Auxiliary function “Image Stamping” can be used, an image must be reg- istered.
A maximum of five images can be registered. For details on using the “Image Stamping” function, refer to ““Image Stamping” Function” on page
Note
The optional hard disk must be installed.
To register an image stamp
1Press the [Utility] key.
2Touch [User Set].
3Touch [Image Mem. Input].
Utility Mode Operations Chapter 5
Di2010/Di2510/Di3010/Di3510 |
