Speed Queen 40125301 owner manual Reversing the Door, To reverse doors perform the following steps

Page 7

Reversing the Door

To reverse doors perform the following steps:

1.Remove four hinge attaching screws.

2.Remove all 9 screws from door and hinges.

3.Pull bottom of door liner out (A), then pull down (B), removing door liner from door panel.

4.Rotate door panel 180° as shown.

5.Remove door strike from door liner and reinstall on opposite side.

6.Insert liner under flange on bottom of door (A), then push top of door liner into place (B)

7.Reinstall 9 screws removed in Step 2.

8.Using a screwdriver, remove two door plugs and reinstall on opposite side of door opening.

9.Reinstall four hinge attaching screws removed in Step 1.

1

2

3

B

A

4

5

6

B

A

7

8

9

7

Image 7
Contents Gas and Electric Dryer ContentsParts and Accessories Asure Extended Service PlanRecognize Safety Symbols, Words, Labels Important Safety Information Sort clothes for drying Clean the lint filter before each useSelect Fabric Selector setting Drying ClothesDrying Clothes contd Select Signal volume some modelsTurn timer to desired setting Push in timer knob to startFeatures, Hints, and Care To reverse doors perform the following steps Reversing the DoorMattress Pads BedspreadsBlankets QuiltsCorduroy Knit articlesLingerie DenimTrouble Shooting Lint Long drying timesStatic Speed Queen Dryer Warranty