Smeg LBS126F manual Solution suggestions for problems, Water

Page 11

6 Solution suggestions for problems

 

 

 

Cause

Explanation / Suggestion

 

Program cannot be started or selected.

 

 

 

 

 

• Machine may have switched to self protection

• Reset your machine by pressing “Start/Pause/

 

mode due to an infrastructure problem (such

Cancel” button for 3 seconds. (see, Canceling a

 

as line voltage, water pressure, etc.).

Program)

 

 

 

 

There is water coming from the bottom of the machine.

 

• Be sure the seals of the water inlet hoses are

• There might be problems with hoses or the

securely fitted.

• Tightly attach the drain hose to the tap.

pump filter.

• Make sure that the pump filter is completely

 

 

closed.

 

 

Machine stopped shortly after the program started.

• Machine can stop temporarily due to low

• It will resume operating when the voltage is back

voltage.

to the normal level.

 

 

It continuously spins. Remaining time does not count down. (For models with a display)

There may be an imbalance of laundry in the machine.

The automatic spin correction system might have been activated due to the unbalanced distribution of the laundry in the drum.

The laundry in the drum may be clustered (bundled laundry in a bag). Laundry should be rearranged and re-spun.

No spinning is performed when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its environment.

It continuously washes. Remaining time does not count down. (For models with a display)

In the case of a paused countdown while taking in

The machine will wait until there is a sufficient amount

 

water:

 

 

of water to avoid poor washing results due to lack of

Timer will not countdown until the machine is filled

 

 

water. Then the timer will start to count down.

 

with the correct amount of water.

 

 

 

 

 

 

 

 

In the case of a paused countdown at the

 

 

 

heating step:

 

 

Time will not count down until the selected

 

 

 

temperature for the program is reached

 

 

 

 

 

 

 

 

The automatic spin correction system might have been

 

 

 

activated due to the unbalanced distribution of the

In the case of a paused countdown at the

 

laundry in the drum.

The laundry in the drum may be clustered (bundled

 

spinning step:

 

 

laundry in a bag). Laundry should be rearranged and

There may be an imbalance of laundry in the

 

 

re-spun.

 

machine.

 

 

No spinning is performed when the laundry is not evenly

 

 

 

 

 

distributed in the drum to prevent any damage to the

 

 

 

machine and to its environment.

 

 

 

There is foaming over the detergent drawer

 

 

Too much detergent was used.

Mix 1 tablespoonful softener and ½ liter water and pour into the main wash compartment of the detergent drawer.

11 - EN

Image 11
Contents LBS126F Intended use General SafetySafety instructions First UseInstallation Loading door Initial preparations for washingPreparing clothes for washing Correct load capacitySelecting a Program and Operating Your Machine Special programs Spin Speed selectionRefresh Program and consumption tableProgress of program Auxiliary functionsTime display Starting the ProgramMaintenance and cleaning Page Water Solution suggestions for problemsLBS126F Specifications