Installation and connection
Package removal
Removal of transport brackets
In removing the wrapping be careful not to damage the appliance with a sharp object.
Before connecting the appliance, let it warm up to room temperature (wait for two hours).
•Our appliances are packed in environmentally friendly materials which may be recycled, deposited or decomposed without any threat to the environment.
•To this end all wrappings are marked accordingly.
•Move the pipes.
•Loosen screws A at the rear of the machine
(Fig. 1).
•Remove the brackets B (Fig. 1) and slide them into the groove on the blocking rod (Fig. 2) - the right one should be turned around.
•Use the brackets to rotate blocking rods for 90° and pull them out.
•Close the openings with attached plastic pegs. Save transport brackets for eventual later use.
Be sure to remove the transport brackets prior first use, otherwise the appliance may be permanently damaged. In such cases the warranty conditions are void.
187348
|
| Fig. 2 |
|
| |
| Fig. 1 | Fig. 2 |
| ||
|
|
|
|
|
|
|
|
|
|
|
|