Smeg WM62121, WM62141 manual Failure Possible cause Remedy

Failure	Possible cause	Remedy
Greasy wads appear	Too little detergent (laundry was	Wash the laundry again.
on the laundry.	very greasy).	Add more detergent for such soiled
		laundry, or use liquid detergent.
Laundry is stained	You used liquid detergent or	Use the detergent containing
after washing.	detergent for colored laundry	whitener.
	which does not contain whitener.
White powdery	It is not the consequence of bad	Immediately rinse the laundry once
residues on the	rinsing, but because of neo-	again.
laundry.	phosphate detergents containing	• Use liquid detergents which do not
	non soluble components	contain zeolites.
	(zeolites) for water softening.	• Try removing the residues with the
	Such substances may be	brush.
	deposited upon the laundry.
Detergent residues in	Low water flow pressure.	• Clean the inlet pipe filter net.
the dispenser.	Some detergents may stick to	• In case of low water pressure
	the dispenser rather hard if it is	increase water level.
	wet.	• Wipe the dispenser prior loading
		detergent.
Softener is not	Sucking cover is not correctly	Clean the dispenser and firmly fix the
completely rinsed,	positioned or is clogged.	cover to its place.
or water is left in the
dispenser dish.
Washing time is	• The machine switched on	• Washing program time may be
longer than usual.	the UKS* system because of	prolonged for 10 minutes and the
	uneven laundry load.	machine still functions perfectly.
	• Power failure occurred.	• Time is prolonged for the power
		failure period.

* UKS: universal stability control - this function prevents excessive vibrations during spinning.

In case you were not successful in repairing the malfunctions in spite of the above suggestion chart, call the nearest authorized service shop.

Repairing the failure arising from inappropriate connections or use of the appliance is not covered by the guarantee, and the repair expenses are paid by the customer.

187348

26