Function Selection, Auxiliary Functions | Smeg LBS 845 instruction


Function Selection

	Additional functions selectable accord-	cotton program, quick wash and rinse
ing to selected program can be selected		plus auxillary functions can not be se-
by pressing related key. Led of selected		lected together. After selecting quick wash
function will be on.		program, if rinse plus key is pressed fast
If not selected together some additional		program will be on and quick wash func-
functions go off when it is not selected		tion led will go off.
with other one. For example; when using
Auxiliary Functions

Quick wash

Shortens washing time for lightly soiled fabrics. This function can be used for cotton and synthetic programs for tem- peratures below 60°C.

Rinse Plus

You can increase the number of the cur- rent rinsing cycles by using this function. Thus, the risk of the sensitive skins get effected by the detergent remaining on the laundry is reduced.

Anti-Creasing

To avoid wrinkling of your clothes, select this function. When Anti-Creasing is

choosen please load less cloth, this way a special washing and spinning profile will reduce the wrinkles and your clothes will be easy to iron.

Spin speed selection knob

You can spin the laundry up to 800 cycle / min. with the models having cycle se- lection button. Your machine will spin not more than 800 cycle / min. for synthetic programs and 600-400 cycle/min. for woollen programs. In addition if you do not want to spin your laundry you may choose “No Spin” position.

Child-proof lock
During washing laundry in order to	new program or alter the program you
maintain that program progress is not af-	have to disable child-proof lock. To do
fected by pressing keys by children there	this press same buttons for three sec-
is child-proof lock. To enable child-proof	onds and Child-proof lock led will be off.
lock, after washing begins, press Quick
wash and Rinse Plus function buttons
together simultaneously for three sec-
onds. Pre-wash additional function led
will always blink.
After program ends in order to start a

Program Progress

After machine starts operation relevant program led on program progress display will be on. When a step is completed that step’s led is off and next step’s led is on. When program is completed “Door” led

will be on again.

During machine operation you can press “Start/Pause/Cancel” key for getting machine to “Pause” position. In this case “Start/Pause/Cancel” led will blink.

Changing Program

You can use this feature for washing laundry in the same textile group for

washing at lower or higher tempera- tures. For example, instead of Cotton60,