Hose
Since there is a risk of freezing especially in the cold areas, the water remaining in the appliance can frozen and damage the appliance. In this case, the water remaining in the pump and hoses should
be drained by removing the pump filter. Water inlet hoses should also be emptied by removing them from the taps.
Cleaning the pump filter
•Clean the foreign substance filter periodically at least for once!
•If the foreign substances (coins, but- tons, baby socks and etc.) clog the foamy water pump, clean the filter.
•Before cleaning, empty the water that remains inside first.
•Hot water danger: There may be 15 liters of hot water at 90°C in the machine. Open the filter carefully.
Drain the water completely in the follow-
ing situations...
• before cleaning the foreign substance filter;
• before transporting the machine ( for example moving into a new house);
• when there is a risk of freezing.
1.Turn off the appliance, unplug the power cable and close the tap. Wait for the hot soapy water to cool enough. Oth- erwise, there is a risk of scalding.
2.Open the service cover by pressing the button. In order to prevent the little amount of water that is inside pump spill- ing over the floor, put a container in front of the filter cover. Take out the filter by turning anticlockwise.
3.To loosen the foreign substance filter, turn it half turn (anticlockwise) and take the remaining water with a cloth. When there is no water, turn the foreign sub- stance filter until it is totally released and take it out.
4.Clean the foreign substance filter and pump opening.
5.Reinstall the foreign substance filter and turn it tightly (clockwise).
6.Close the service cover.
14