Smeg GB ST L80 manual First Wash Cycle, Precautions and General Recommendations

Page 5

FIRST WASH CYCLE

We recommend that the first wash cycle be carried out empty. This will remove any residual water used in the factory checks.

1.Turn on the tap.

2.Close the drum flaps.

3.Pour a small amount of detergent (about 30 ml) into the detergent dispenser .

4.Select a short programme (see programme chart).

5.Switch on the machine by pressing the “On/Off” button.

PRECAUTIONS AND GENERAL

RECOMMENDATIONS

1.Packing

The packaging materials are 100% recyclable and bear the recycling symbol . Adhere to local regulations when disposing of packaging material.

2.Energy saving tips

Achieve the best use of energy, water, detergent and time by using the recommended maximum load size.

Do not exceed the detergent dosages indicated in the manufacturer’s instructions.

The Eco Ball - a special system in the outlet - will prevent detergent loss from the drum to avoid detergent loss into the environment.

Use “Prewash” for heavily soiled laundry only! Save detergent, time, water and energy consumption by not selecting “Prewash” for slight to normally soiled laundry.

Pretreat stains with stain remover or soak dried in stains in water before washing to reduce the necessity of a hot wash program.

Save energy by using a 60°C instead of a 90°C wash programme or a 40°C instead of a 60°C wash programme.

Save energy and time by selecting a high spin speed to reduce the water content in laundry before using a tumble dryer (for machines with adjustable spin speed).

3.Disposing of packaging and old washing machines

This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative

consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The symbol on the product, or on the documents accompanying the product, indicates that this appliance may not be treated as household waste. Instead it shall be handed over

to the applicable collection point for the recycling of electrical and electronic equipment.

Disposal must be carried out in accordance with local environmental regulations for waste disposal. For more detailed information about treatment, recovery and recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

The washing machine is built from reusable materials. It must be disposed of in compliance with current local waste disposal regulations.

Before scrapping, cut off the power cable so that the washing machine cannot be connected to the mains.

Remove detergent from compartment if you intend scrapping your washing machine.

4.Child safety

Children must not be allowed to play with or in the washing machine.

5.General recommendations

Do not leave the washing machine connected when not in use. Turn off the tap.

Before cleaning or carrying out maintenance switch off the washing machine and disconnect it from the mains supply.

To clean the outside of the washing machine, use a neutral detergent and a damp cloth.

Do not use abrasive detergents.

Do not attempt to force the lid open.

If necessary, the power cable may be replaced with an identical one obtained from our After- Sales Service. The power cable must only be replaced by a qualified technician.

6.EC Declaration of Conformity

This washing machine has been designed, constructed and distributed in compliance with the safety requirements of EC Directives: 73/23/EEC Low Voltage Directive 89/336/EEC EMC Directive

93/68/EEC CE Marking Directive

GB 3

Image 5
Contents GB STL Programme Chart Intensive Rinse button Load Water Energy Approx. ProgrammeOne rinse cycle is added to ensure a more intensive rinse Half Load buttonContents Before Using the Washing Machine First Wash Cycle Precautions and General RecommendationsPreparation of the Washing Description of the Washing MachineLoading the laundry Dosage Detergents and AdditivesFilling up with detergents and additives Choice of the right detergents and additivesProgramme Selection Cleaning the Foreign Body Trap Detergent dispenser Draining Residual WaterPlug the washing machine back Water inlet hose filterWashing machine does not start, no lamp lights up Water inlet hosesWashing machine does not start, but the pilot lamp is on Washing machine stops during the programmePump operates Water stop fault depending on modelWater Stop fault may have been triggered by Wait for the water to cool so as to avoid any accidents Before contacting After-Sales ServiceSpecify Removal of transport bracket Connect the water inlet hose Adjust the feetConnect the water drain hose Water stop anti-flooding systemDepending on model FloorValid Only For Great Britain And Ireland Fuse replacementTo fit a new plug, proceed as follows Polarized Plugs e.g pin, 13 amp plug conforming to BS 1363A