Smeg K600TL1 manual Valid Only For Great Britain And Ireland, Fuse replacement

Page 18

ELECTRICAL CONNECTION

Do not use extension leads or multi sockets. Electrical connections must be made in accordance with local regulations.

1) Warning - this appliance must be earthed

This appliance is normally supplied with a mains lead having a plug fitted in the factory which has been checked for correct earth continuity.

If the fitted plug is not suitable for your socket outlet, or if the machine’s mains lead is not fitted with a plug, you should fit a suitable new, good quality plug by following the instructions in (2) below.

Any unsuitable plug should be cut off and disposed of in order to avoid a possible shock hazard should it be inserted into a socket.

2)CONNECTION TO A REWIRABLE PLUG - to be carried out only by a qualified electrician

The wires in the mains lead are coloured in accordance with the following code:

BLUE - “NEUTRAL” (“N”) BROWN - “LIVE” (“L”)

GREEN AND YELLOW - “EARTH” (“E”)

Valid Only For Great Britain And Ireland

To fit a new plug, proceed as follows:

2.1Polarized Plugs (e.g. 3 pin, 13 amp plug conforming to BS 1363A)

a.The GREEN AND YELLOW wire must be connected to the terminal in the plug which is marked with the

letter “E” or by the Earth symbol

 

or coloured

green and yellow.

 

 

 

 

b.The BLUE wire must be connected to the terminal which is marked with the letter “N” or coloured blue.

c.The BROWN wire must be connected to the terminal which is marked with the letter “L” or coloured brown.

2.2Non-polarized plugs (e.g. 2 pin with side earth contact). The wire which is coloured GREEN AND YELLOW must be connected to the earth contact. The other two wires should be connected to the two pins, irrespective of colour.

Fuse replacement

If the mains lead of this appliance is fitted with a

BS 1363A 13amp fused plug, replace the fuse only with an A.S.T.A. approved type conforming to BS 1362 and proceed as follows:

1.Remove the fuse cover (A) and fuse (B).

2.Fit the replacement 13 A fuse into the fuse cover.

3.Refit both into plug.

GB 18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Contents Remove the packaging and check Electrical connection Before Using the Washing MachineInstall the washing machine Remove the transport bracketPrecautions and General Recommendations First Wash CycleDescription of the Washing Machine Preparation of the WashingSort the laundry Stain removal Dyeing and bleachingStarching Loading the laundry Open the machine lidDetergents and Additives DosageFilling up with detergents and additives Programme Selection Cleaning the Foreign Body Trap Draining Residual Water Detergent dispenserCheck and clean regularly at least two or three times a year Water inlet hose filterWashing machine does not start, but the pilot lamp is on Water inlet hosesWashing machine does not start, no lamp lights up Washing machine stops during the programmeWater stop fault depending on model Water Stop fault may have been triggered byBefore contacting After-Sales Service SpecifyRemoval of transport bracket Adjust the feet Connect the water inlet hoseWater stop anti-flooding system Connect the water drain hoseFuse replacement Valid Only For Great Britain And IrelandPolarized Plugs e.g pin, 13 amp plug conforming to BS 1363A GB K 600 TL1 No Spin button Rinse Hold buttonAppliance in Rinse Hold Half Load button

K600TL1 specifications

The Smeg K600TL1 represents a perfect blend of style, innovation, and functionality in the realm of kitchen appliances. Known for their aesthetically pleasing designs and robust performance, Smeg has once again delivered a product that caters to both modern living and traditional values.

One of the standout features of the K600TL1 is its impressive cooling capacity, making it an ideal choice for households that require ample storage for fresh and frozen foods. The appliance boasts a generous capacity, allowing users to store a wide variety of groceries while keeping them organized and easy to access.

Equipped with advanced cooling technologies, the K600TL1 ensures optimal performance and energy efficiency. The MultiFlow cooling system evenly distributes cold air throughout the refrigerator, eliminating hotspots and maintaining a consistent temperature. This feature not only preserves the freshness of food for longer but also reduces energy consumption, making it an environmentally friendly choice.

Another innovative technology incorporated in this model is the No Frost system. This greatly reduces the need for manual defrosting, as it actively prevents the build-up of ice, ensuring the freezer remains unclogged and fully functional. Users can enjoy hassle-free maintenance and spend less time cleaning and more time enjoying their meals.

The Smeg K600TL1 also includes adjustable shelving and door bins, providing customizable storage options. This flexibility allows users to arrange the refrigerator compartments according to their personal needs, maximizing both space and convenience. Furthermore, the LED lighting enhances visibility within the fridge, making it easier to find ingredients at any time.

Safety and hygiene are also prioritized with this appliance. The antibacterial treatment on the inner walls helps inhibit the growth of harmful bacteria, contributing to a cleaner and healthier environment for food storage.

With its sleek stainless steel finish and chic design, the Smeg K600TL1 not only enhances kitchen aesthetics but also serves as a statement piece in any home. Overall, the Smeg K600TL1 is an ideal combination of style, efficiency, and innovative technology, making it a top contender for those looking to upgrade their kitchen appliances.
Top Page Image Contents