Smeg K600TL1 manual Draining Residual Water, Detergent dispenser

Page 10

DRAINING RESIDUAL WATER

When should I drain residual water (draining problem)?

•Before transporting (moving) the machine.

•If the washing machine is installed in a room subject to sub- zero temperatures. It is best in this case to drain the machine after every wash.

1.Stop the washing machine and unplug it.

2.Turn off the tap, disconnect the water supply hose from the machine and allow the water to drain into a basin.

3.Open the foreign body trap, let the water drain into a small shallow basin and close the trap.

4.Release the drain hose then open the fixing clip located at the rear of the machine (see arrow A).

5.Let the residual water flow into a shallow basin.

6.Wait until the flow stops.

7.Fix the drain hose again with the clip and replace it with the U- bend.

8.Reconnect the water supply hose and the power plug.

Important:

•After draining the residual water, screw on the machine’s water supply hose by hand. Check water-tightness of washing machine connections by turning the tap completely on.

A

CARE AND MAINTENANCE

Detergent dispenser

1.Push in the buttons on each side of the dispenser.

2.Pull the dispenser towards you and remove.

A small quantity of water can remain in the dispenser. It is advisable to carry the dispenser in an upright position.

3.Wash the dispenser using running water.

You can also remove the siphon caps in the dispenser for cleaning.

4.Replace the siphon caps in the dispenser (if removed). Make sure that they lock in place.

5.Replace the dispenser by locating the bottom tabs in the lid holes and pivot until both of the upper buttons lock.

Note: ensure that the detergent dispenser is correctly reinstalled.

GB 10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Contents Remove the packaging and check Electrical connection Before Using the Washing MachineInstall the washing machine Remove the transport bracketPrecautions and General Recommendations First Wash CyclePreparation of the Washing Description of the Washing MachineSort the laundry Dyeing and bleaching Stain removalStarching Loading the laundry Open the machine lidDosage Detergents and AdditivesFilling up with detergents and additives Programme Selection Cleaning the Foreign Body Trap Draining Residual Water Detergent dispenserCheck and clean regularly at least two or three times a year Water inlet hose filterWashing machine does not start, but the pilot lamp is on Water inlet hosesWashing machine does not start, no lamp lights up Washing machine stops during the programmeWater stop fault depending on model Water Stop fault may have been triggered byBefore contacting After-Sales Service SpecifyRemoval of transport bracket Adjust the feet Connect the water inlet hoseWater stop anti-flooding system Connect the water drain hoseValid Only For Great Britain And Ireland Fuse replacementPolarized Plugs e.g pin, 13 amp plug conforming to BS 1363A GB K 600 TL1 No Spin button Rinse Hold buttonAppliance in Rinse Hold Half Load button

K600TL1 specifications

The Smeg K600TL1 represents a perfect blend of style, innovation, and functionality in the realm of kitchen appliances. Known for their aesthetically pleasing designs and robust performance, Smeg has once again delivered a product that caters to both modern living and traditional values.

One of the standout features of the K600TL1 is its impressive cooling capacity, making it an ideal choice for households that require ample storage for fresh and frozen foods. The appliance boasts a generous capacity, allowing users to store a wide variety of groceries while keeping them organized and easy to access.

Equipped with advanced cooling technologies, the K600TL1 ensures optimal performance and energy efficiency. The MultiFlow cooling system evenly distributes cold air throughout the refrigerator, eliminating hotspots and maintaining a consistent temperature. This feature not only preserves the freshness of food for longer but also reduces energy consumption, making it an environmentally friendly choice.

Another innovative technology incorporated in this model is the No Frost system. This greatly reduces the need for manual defrosting, as it actively prevents the build-up of ice, ensuring the freezer remains unclogged and fully functional. Users can enjoy hassle-free maintenance and spend less time cleaning and more time enjoying their meals.

The Smeg K600TL1 also includes adjustable shelving and door bins, providing customizable storage options. This flexibility allows users to arrange the refrigerator compartments according to their personal needs, maximizing both space and convenience. Furthermore, the LED lighting enhances visibility within the fridge, making it easier to find ingredients at any time.

Safety and hygiene are also prioritized with this appliance. The antibacterial treatment on the inner walls helps inhibit the growth of harmful bacteria, contributing to a cleaner and healthier environment for food storage.

With its sleek stainless steel finish and chic design, the Smeg K600TL1 not only enhances kitchen aesthetics but also serves as a statement piece in any home. Overall, the Smeg K600TL1 is an ideal combination of style, efficiency, and innovative technology, making it a top contender for those looking to upgrade their kitchen appliances.
Top Page Image Contents