Alliance Laundry Systems 9001014R7 manual Safety Information, Explanation of Safety Messages

Page 5

Basic Installation/Operation

Safety Information

Explanation of Safety Messages

Precautionary statements (“DANGER,” “WARNING,” and “CAUTION”), followed by specific instructions, are found in this manual and on machine decals. These precautions are intended for the personal safety of the operator, user, servicer, and those maintaining the machine.

DANGER

DANGER indicates the presence of a hazard that will cause severe personal injury, death, or substantial property damage if the danger is ignored.

WARNING

WARNING indicates the presence of a hazard that can cause severe personal injury, death, or substantial property damage if the warning is ignored.

CAUTION

CAUTION indicates the presence of a hazard that will or can cause minor personal injury or property damage if the caution is ignored.

Additional precautionary statements (“IMPORTANT” and “NOTE”) are followed by specific instructions.

IMPORTANT: The word “IMPORTANT” is used to inform the reader of specific procedures where minor machine damage will occur if the procedure is not followed.

NOTE: The word “NOTE” is used to communicate installation, operation, maintenance or servicing information that is important but not hazard related.

Important Safety Instructions

WARNING

To reduce the risk of fire, electric shock, serious injury or death to persons when using your washer, follow these basic precautions:

W023

1.Read all instructions before using the washer.

2.Refer to the GROUNDING INSTRUCTIONS in the INSTALLATION manual for the proper grounding of the washer.

3.Do not wash textiles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, kerosene, waxes, cooking oils, dry- cleaning solvents, or other flammable or explosive substances as they give off vapors that could ignite or explode.

4.Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances to the wash water. These substances give off vapors that could ignite or explode.

5.Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using a washing machine or combination washer-dryer, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. The gas is flammable, do not smoke or use an open flame during this time.

6.Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near children. This is a safety rule for all appliances.

7.Before the washer is removed from service or discarded, remove the door to the washing compartment.

8.Do not reach into the washer if the wash drum is moving.

9001014

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

3

Image 5
Contents Washer-Extractors Page Contents Model Identification IntroductionImportant Safety Instructions Safety InformationExplanation of Safety Messages Basic Installation/Operation Safety Decals Operator Safety General Specifications Model Overall Dimensions Specifications and DimensionsWeight and Shipping Information Wash Cylinder InformationCentrifugal Force Data Cylinder SpeedsBalance Detection Direct Steam Heating OptionalWeight and Shipping Information RPM 18 560 mm 660 mm Hot Water Inlet Required Model Flushing Supply Dispenser Steam Connection Input Optional 82 mm 860 mm 33.86 916 mm 36.06 332 mm 13.05 50 mm 34 mm 765 mm 30.12 780 mm 30.71 833 mm 32.8 External Liquid Supply Inlets 488 mm 41.73 19.2 960 mm 100 1010 mm 360 mm 273 mm 14.25 1185 mm 56.5 mm Recommended Minimum Clearances Model 100 135 165 200 InstallationFloor Load Data Model 100 135 165 200 Machine FoundationMechanical Installation 898 mm 1300 mm 33 mm 51.2 1251 mm 1185 mm 46.7 Mounting Bolt Installation If Required Electric Heat Electrical SpecificationsElectrical Specifications Voltage Designation Code Control Identification OperationLoad the Machine Disposal of Unit