Auxiliary Function Selection, Program Follower

Auxiliary Function Selection

It is not possible to activate all auxiliary functions in all wash programs. If any auxiliary function is selected, its led will be on. It is restricted to select some auxiliary functions together. For example, if the cotton program is selected, “quick wash” and “pre-wash” functions can not be selected at the same time. If “Pre-wash” button is selected first and the “Quick wash” function next, the led of the pre-wash function will be off as it is not active any more.

Program Follower

If the machine is on, a program can be followed by means of the program follower If a washing step is over and the next step is started, the led of the previous step will continue to light.

It means if the washing operation is finished, all related washing steps on the program follower will be on. Pre-wash button led will be on, only if this auxiliary function is selected.

Additional Laundry

Press the Start/Pause button. If the water level does not exceed the limitations, in 1 to 2 minutes door open led will come on. It means the washing machine is ready to add laundry.

If door open led is not lit up after 1-2 minutes, it means the water level inside the machine is too high and it is not allowed to open the door and add laundry. (Look at Program Cancelling).

If you change your mind as not adding laundry, press Start/Pause button again to let the program continue.