Beko WBM 751441 LA user manual Use smaller amounts of detergent for this type of item

Page 34

Detergent residue in the detergent drawer.

•Detergent is put in wet drawer. >>> Dry the detergent drawer before putting in detergent.

•Detergent has gotten damp. >>> Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures.

•Water pressure is low. >>> Check the water pressure.

•The detergent in the main wash compartment got wet while taking in the prewash water. Holes of the detergent compartment are blocked. >>> Check the holes and clean if they are clogged.

•There is a problem with the detergent drawer valves. >>> Call the Authorized Service Agent.

•Detergent might be mixed with the softener. >>> Do not mix the softener with detergent. Wash and clean the dispenser with hot water.

•Regular drum cleaning is not applied. >>> Clean the drum regularly. For this, please see "Cleaning the loading door and the drum".

There is detergent left on the laundry.

•Excessive laundry was loaded in. >>> Do not load the machine in excess.

•Wrong programme and temperature were selected. >>> Select the proper programme and temperature for the laundry to be washed.

•Wrong detergent was used. >>> Select the proper detergent for the laundry to be washed.

•Regular drum cleaning is not applied. >>> Clean the drum regularly. For this, please see "Cleaning the loading door and the drum".

Too much foam forms in the machine.

•Improper detergents for the washing machine are being used. >>> Use detergents appropriate for the washing machine.

•Excessive amount of detergent is used. >>> Use only sufficient amount of detergent.

•Detergent was stored under improper conditions. >>> Store detergent in a closed and dry location. Do not store in excessively hot places.

•Some meshed laundry such as tulle may foam too much because of their texture.

>>> Use smaller amounts of detergent for this type of item.

•Detergent is put in the wrong compartment. >>> Put the detergent in the correct compartment.

•Softener is being taken early. >>> There may be problem in the valves or in the detergent dispenser. Call the Authorized Service Agent.

•Regular drum cleaning is not applied. >>> Clean the drum regularly. For this, please see "Cleaning the loading door and the drum".

34

EN

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Washing Machine User’s Manual Explanation of symbols Table of Contents Your washing machine OverviewTechnical specifications General safety Important safety instructionsIntended use Childrens safety Removing packaging reinforcement InstallationAppropriate installation location Removing the transportation locksConnecting water supply Connecting to the drainAdjusting the feet Electrical connectionTransportation of the product First useDisposing of packaging material Disposing of the old productSorting the laundry PreparationThings to be done for energy saving Preparing laundry for washingCorrect load capacity Loading the laundryUsing detergent and softener Using bleaches Using gel and tablet detergentUsing starch Using limescale removerTips for efficient washing Soiling Level ClothesOperating the product Control panelProgramme selection Display symbolsPreparing the machine Main programmesAdditional programmes Spin speed selection Temperature selectionEconomy symbol Cold Wash OptionProgramme and consumption table Page Auxiliary function selection Time display Delayed startCancelling the Delayed Start function Starting the programmeChanging the selections after programme has started Loading door lockChild Lock Machine is in Rinse Hold mode Cancelling the programmeEnd of programme Cleaning the loading door and the drum Maintenance and cleaningCleaning the detergent drawer Cleaning the body and control panelCleaning the water intake filters Draining remaining water and cleaning the pump filterPage Troubleshooting Tap is turned off. Open the inlet water taps fullyPage Select the proper temperature for the laundry to be washed Page Use smaller amounts of detergent for this type of item Machine does not start. Nothing appears on the display
Top Page Image Contents