Beko WBM 751441 LA user manual Important safety instructions, General safety, Intended use

Page 6

2Important safety instructions

This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty.

General safety

This product should not be used by persons with physical, sensory or mental disorders or unlearned or inexperienced people (including children) unless they are attended by a person who will be responsible for their safety or who will instruct them accordingly for use of the product.

8 years and older children and people with reduced physical, sensory, and mental abilities as well as unskilled or inexperienced persons can use this appliance provided that they are supervised and instructed on safe use of the appliance as well as to the related dangers. Children should not play or tamper with the appliance. Cleaning and user maintenance should never be performed by children unless supervised by a responsible adult.

Never place the product on a carpet- covered floor; otherwise, lack of airflow beneath the machine will cause electrical parts to overheat. This will cause problems with your product.

Do not operate the product if the power cable / plug is damaged. Call a qualified electrician.

Have a qualified electrician connect a 16-Ampere fuse to the installation location of the product.

If the product has a failure, it should not be operated unless it is repaired by the

Authorized Service Agent. There is the risk of electric shock!

This product is designed to resume operating in the event of powering on after a power interruption. If you wish to cancel the programme, see "Cancelling the programme" section.

Connect the product to a grounded outlet protected by a fuse complying with the values in the "Technical specifications" table. Do not neglect to have the grounding installation made

by a qualified electrician. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.

The water supply and draining hoses must be securely fastened and remain undamaged. Otherwise, there is the risk of water leakage.

Never open the loading door or remove the filter while there is still water in the drum. Otherwise, risk of flooding and injury from hot water will occur.

Do not force open the locked loading door. The loading door will be ready to open just a few minutes after the washing cycle comes to an end.

In case of forcing the loading door to open, the door and the lock mechanism may get damaged.

Unplug the product when not in use.

Never wash the product by spreading or pouring water onto it! There is the risk of electric shock!

Never touch the plug with wet hands!

Never unplug by pulling on the cable, always pull out by grabbing the plug.

Use detergents, softeners and supplements suitable for automatic washing machines only.

Follow the instructions on the textile tags and on the detergent package.

The product must be unplugged during installation, maintenance, cleaning and repairing procedures.

Always have the installation and repairing procedures carried out by the Authorized Service Agent.

Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.

Intended use

This product has been designed for domestic use. It is not suitable for commercial use and it must not be used out of its intended use.

The product must only be used for washing and rinsing of laundry that are marked accordingly.

6

EN

Image 6
Contents Washing Machine User’s Manual Explanation of symbols Table of Contents Your washing machine OverviewTechnical specifications Important safety instructions General safetyIntended use Childrens safety Removing packaging reinforcement InstallationAppropriate installation location Removing the transportation locksConnecting water supply Connecting to the drainAdjusting the feet Electrical connectionTransportation of the product First useDisposing of packaging material Disposing of the old productSorting the laundry PreparationThings to be done for energy saving Preparing laundry for washingCorrect load capacity Loading the laundryUsing detergent and softener Using bleaches Using gel and tablet detergentUsing starch Using limescale removerTips for efficient washing Soiling Level ClothesOperating the product Control panelProgramme selection Display symbolsPreparing the machine Main programmesAdditional programmes Spin speed selection Temperature selectionEconomy symbol Cold Wash OptionProgramme and consumption table Page Auxiliary function selection Time display Delayed startCancelling the Delayed Start function Starting the programmeLoading door lock Changing the selections after programme has startedChild Lock Cancelling the programme Machine is in Rinse Hold modeEnd of programme Cleaning the loading door and the drum Maintenance and cleaningCleaning the detergent drawer Cleaning the body and control panelCleaning the water intake filters Draining remaining water and cleaning the pump filterPage Troubleshooting Tap is turned off. Open the inlet water taps fullyPage Select the proper temperature for the laundry to be washed Page Use smaller amounts of detergent for this type of item Machine does not start. Nothing appears on the display