Beko WBM 751441 LA Cancelling the programme, Machine is in Rinse Hold mode, End of programme

Page 26

C Same phrase will appear on the display if you press any button when Child Lock is enabled.

To deactivate the Child Lock:

Press and hold 2nd and 4th Auxiliary Function buttons for 3 seconds. “COFF” appears on the display.

C Do not forget to disable the child lock at the end of the programme if it was enabled before. Otherwise, machine will not allow to select a new programme.

Cancelling the programme

Press and hold Start / Pause / Cancel button for 3 seconds. Start symbol flashes. Symbol of the step at which the programme was cancelled remains lit. "End" appears on the display and the programme is cancelled.

C If you want to open the loading door after you have cancelled the programme but it is not possible to open the loading door since the water level in the machine is above the loading door opening, then turn the Programme Selection knob

to Pump+Spin programme and discharge the water in the machine.

Machine is in Rinse Hold mode

Spin symbol flashes and Pause symbol illuminates when the machine is in Rinse Hold mode.

If you want to spin your laundry when the machine is in this mode:

Adjust the spin speed and press Start / Pause / Cancel button. Pause symbol disappears and Start symbol appears. Programme resumes, discharges the water and spins the laundry.

If you only want to drain the water without spinning:

Just press Start / Pause / Cancel button. Pause symbol disappears. Start symbol appears. Programme resumes and discharges the water only.

End of programme

“End” appears on the display at the end of the programme. Symbols of the programme steps remain lit. Auxiliary function, spin speed and temperature that were selected at the beginning of the programme remain selected.

26

EN

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Washing Machine User’s Manual Explanation of symbols Table of Contents Your washing machine OverviewTechnical specifications Intended use Important safety instructionsGeneral safety Childrens safety Removing packaging reinforcement InstallationAppropriate installation location Removing the transportation locksConnecting water supply Connecting to the drainAdjusting the feet Electrical connectionTransportation of the product First useDisposing of packaging material Disposing of the old productSorting the laundry PreparationThings to be done for energy saving Preparing laundry for washingCorrect load capacity Loading the laundryUsing detergent and softener Using bleaches Using gel and tablet detergentUsing starch Using limescale removerTips for efficient washing Soiling Level ClothesOperating the product Control panelProgramme selection Display symbolsPreparing the machine Main programmesAdditional programmes Spin speed selection Temperature selectionEconomy symbol Cold Wash OptionProgramme and consumption table Page Auxiliary function selection Time display Delayed startCancelling the Delayed Start function Starting the programmeChild Lock Loading door lockChanging the selections after programme has started End of programme Cancelling the programmeMachine is in Rinse Hold mode Cleaning the loading door and the drum Maintenance and cleaningCleaning the detergent drawer Cleaning the body and control panelCleaning the water intake filters Draining remaining water and cleaning the pump filterPage Troubleshooting Tap is turned off. Open the inlet water taps fullyPage Select the proper temperature for the laundry to be washed Page Use smaller amounts of detergent for this type of item Machine does not start. Nothing appears on the display
Top Page Image Contents