LevelOne Quick installation guide, Installation, KVM-9000 hardware installation, Video modes

Page 5

1. The quick installation guide

Installation

LevelOne IP-KVM Extender, KVM-9000, redirects local keyboard, mouse and video data to a remote administration console. All data is transmitted via IP. IP-KVM Extender can be used in a multi administrator and multi server environment as well. Besides, KVM-9000 is a KVM switch, which can also be used with a local console.

KVM-9000 hardware installation

Host

Console

Figure 1-1 The connectors of single port KVM-9000 front and rear side

Please perform the following steps:

1.Connect the power supply to KVM-9000

2.Connect the monitor to the KVM-9000 console side.

3.Connect the keyboard to the KVM-9000 console side.

4.Connect the mouse to the KVM-9000 console side.

5.Connect a VGA cable (15-pin HDDB Male / Male) with the Male side to both of the PC and the host port of the KVM-9000.

6.Connect one purple end of 3-in-one cable to the PS/2 mouse port on the computer, and the other end of 3-in-one cable to the host PS/2 mouse port on the KVM-9000.

7.Connect one green end of 3-in-one cable to PS/2 keyboard port on the computer, and the other end of 3-in-one cable to the host PS/2 keyboard port on the KVM-9000.

8.Connect the type A connector of USB A-B cable to the host system, while using remote mass storage control.

9.Connect Ethernet to LAN port and/or modem to DB-9 serial port, depending on how you want to access KVM-9000

Video modes

KVM-9000 recognizes a limited number of common video modes. When running X-Window on the host system, please don’t use any custom mode lines with special video modes. If done so, KVM-9000 may not be able to detect these. You are on the safe side with all standard VESA video modes. Please refer to Appendix C for a list of all known modes.

Initial IP configuration

Initially the KVM-9000 network interface is configured with the parameters shown in Table 1-1.

1

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Version LevelOnePage Table of Contents FCC Installation Quick installation guideKVM-9000 hardware installation Initial IP configurationRemote Console Web interfaceTop part of the Remote Console Introduction When the server is up and runningWhen the server is dead Package contents FeaturesModel No System requirementSingle port KVM-9000 DescriptionCable diagrams Connecting KVM-9000 to the host system Hardware installationOperation Overview StepConnect the monitor to the KVM-9000 console side Ethernet connection OptionPage Initial Configuration ConfigurationInitial configuration via Dhcp server KVM-9000 Setup ToolInitial configuration via serial console AuthenticationKeyboard, Mouse and Video configuration IP autoconfigurationKVM-9000 keyboard settings IP addressHost system mouse settings Remote Mouse SettingsAuto mouse speed and mouse synchronization Fast SyncActive Desktop Windows XP Mouse SettingsSingle and Double Mouse Mode Telnet UsagePrerequisites Login into the KVM-9000 Login into the KVM-9000 and logoutMain NavigationGeneral description Remote ConsoleLogout from the KVM-9000 Remote Console Control Bar Main WindowRemote Console Options Menu Monitor OnlyMouse Handling Exclusive AccessScaling Local Cursor Video SettingsSoft Keyboard 11. Video Settings Panel12. Soft Keyboard 14. Remote Console Confirmation Dialog Remote Console Status LineKVM Console Remote ControlMenu Options Reset hostcard Power onoff shortlongHelp ClsTerminal Upload a Floppy Image Virtual MediaUse Image on Windows Share Samba CD ROMSelect Sharing to open the configuration dialog Unix and UNIX-like OS Creating an Image Floppy ImagesDd if=/dev/cdrom of=/tmp/cdrom.image CD ROM/ISO ImagesDrive redirection Driver Installation17. KVM Vision Viewer Setup step 17. Create a new Device 18. New Device Drive Redirection SettingsOptions OptionsUsers And Groups Change PasswordUser Management User Console KVM Settings15. User Console Settings Part Page Keyboard/Mouse 17. Keyboard and Mouse SettingsVideo 18. Video SettingsPage Network 5Device SettingsPage 20. Dynamic DNS Dynamic DNSPage 22. Device Security SecurityCertificate 23. Certificate Settings24. SSL Certificate Upload 25. Serial Port Serial PortPage 27. Date and Time Date And Time29. Event Log Event LogPage Connected Users MaintenanceDevice Information 32. Event Log List Update FirmwarePage 34. Unit Reset Unit ResetTroubleshooting CE Certificate CertificatesPin Assignments Page Figure B.1 English US Keyboard Layout, used for key codes Key CodesTable B.1 Key Names Video Modes Rack mount kit installation diagram

KVM-9000 specifications

The LevelOne KVM-9000 is a state-of-the-art KVM switch designed to streamline the management of multiple computer systems from a single workstation. This device is particularly beneficial in environments where space and efficiency are paramount, as it allows IT professionals to control multiple servers, workstations, or virtual machines seamlessly.

One of the standout features of the KVM-9000 is its capability to support an impressive number of computers, accommodating up to 16 different systems. This makes it an ideal solution for data centers, server rooms, and other environments where administrators need to manage a large array of machines without the clutter of numerous keyboards and mice.

The KVM-9000 is built with high-quality technologies that enhance its performance and reliability. It utilizes advanced technology to ensure superior video quality, supporting resolutions up to 1920 x 1200 at 60Hz. This ensures that users can enjoy clear and sharp visuals, crucial for tasks that require attention to detail.

Another characteristic of the KVM-9000 is its user-friendly interface. The device features an intuitive on-screen display (OSD) that simplifies the process of switching between computers. Users can easily navigate through connected devices, select the desired computer, and initiate control with minimal disruption to their workflow.

Security is also a key focus of the KVM-9000. It is equipped with robust security features that protect sensitive data from unauthorized access. The switch supports hotkey and push-button switching options, allowing users to maintain control over their systems while minimizing the risk of accidental changes or breaches.

Moreover, the KVM-9000 incorporates advanced USB technology, offering support for various peripherals. This flexibility allows users to connect a wide range of devices, such as printers, scanners, and external storage, enhancing productivity further.

The KVM-9000 is designed with durability in mind, constructed to withstand the rigors of continuous use in demanding environments. It is compact and lightweight, making installation and relocation a breeze.

In summary, the LevelOne KVM-9000 is an innovative and efficient KVM switch that enhances the management capabilities of multiple computer systems. With its extensive support for connections, excellent video resolution, user-friendly interface, and strong security features, it stands out as a leading choice for professionals seeking to optimize their IT operations.
Top Page Image Contents