LevelOne KVM-9000 user manual

Page 53

Primary DNS Server IP Address

IP address of the primary Domain Name Server in dot notation. This option may be left empty, however the KVM-9000 will not be able to perform name resolution.

Secondary DNS Server IP Address

IP address of the secondary Domain Name Server in dot notation. It will be used in case the Primary DNS Server cannot be contacted.

Remote Console And HTTPS port

Port number at which the KVM-9000's Remote Console server and HTTPS server are listening. If left empty the default value will be used.

HTTP port

Port number at which the KVM-9000's HTTP server is listening. If left empty the default value will be used.

Telnet port

Port number at which the KVM-9000's Telnet server is listening. If left empty the default value will be used.

Bandwidth limitation

The maximum network traffic generated through the KVM-9000 ethernet device. Value in Kbit/s.

Disable Enterprise Mangement

With this option you may exclude the KVM-9000 from management by your supplier.

Disable Setup Protocol

Enable this option to exclude the KVM-9000 from the setup protocol.

49

Image 53

Contents

Version LevelOnePage Table of Contents FCC Installation Quick installation guideKVM-9000 hardware installation Initial IP configurationRemote Console Web interfaceTop part of the Remote Console Introduction When the server is up and runningWhen the server is dead Package contents FeaturesModel No System requirementSingle port KVM-9000 DescriptionCable diagrams Connecting KVM-9000 to the host system Hardware installationOperation Overview StepConnect the monitor to the KVM-9000 console side Ethernet connection OptionPage Initial Configuration ConfigurationInitial configuration via Dhcp server KVM-9000 Setup ToolInitial configuration via serial console AuthenticationKeyboard, Mouse and Video configuration IP autoconfigurationKVM-9000 keyboard settings IP addressHost system mouse settings Remote Mouse SettingsAuto mouse speed and mouse synchronization Fast SyncActive Desktop Windows XP Mouse SettingsSingle and Double Mouse Mode Telnet UsagePrerequisites Login into the KVM-9000 Login into the KVM-9000 and logoutMain NavigationGeneral description Remote ConsoleLogout from the KVM-9000 Remote Console Control Bar Main WindowRemote Console Options Menu Monitor OnlyMouse Handling Exclusive AccessScaling Local Cursor Video SettingsSoft Keyboard 11. Video Settings Panel12. Soft Keyboard 14. Remote Console Confirmation Dialog Remote Console Status LineKVM Console Remote ControlMenu Options Reset hostcard Power onoff shortlongHelp ClsTerminal Upload a Floppy Image Virtual MediaUse Image on Windows Share Samba CD ROMSelect Sharing to open the configuration dialog Unix and UNIX-like OS Creating an Image Floppy ImagesDd if=/dev/cdrom of=/tmp/cdrom.image CD ROM/ISO ImagesDrive redirection Driver Installation17. KVM Vision Viewer Setup step 17. Create a new Device 18. New Device Drive Redirection SettingsOptions OptionsUsers And Groups Change PasswordUser Management User Console KVM Settings15. User Console Settings Part Page Keyboard/Mouse 17. Keyboard and Mouse SettingsVideo 18. Video SettingsPage Network 5Device SettingsPage 20. Dynamic DNS Dynamic DNSPage 22. Device Security SecurityCertificate 23. Certificate Settings24. SSL Certificate Upload 25. Serial Port Serial PortPage 27. Date and Time Date And Time29. Event Log Event LogPage Connected Users MaintenanceDevice Information 32. Event Log List Update FirmwarePage 34. Unit Reset Unit ResetTroubleshooting CE Certificate CertificatesPin Assignments Page Figure B.1 English US Keyboard Layout, used for key codes Key CodesTable B.1 Key Names Video Modes Rack mount kit installation diagram