LevelOne KVM-9000 user manual

Page 60

Configuration or console login

Do not use the serial port for any special function, use it only for the initial configuration (see Table 4-1 ).

Modem

The KVM-9000 offers remote access using a telephone line in addition to the standard access over the built-in Ethernet adapter. The modem needs to be connected to the serial interface of the KVM-9000 .

Logically, connecting to the KVM-9000 using a telephone line means nothing else than building up a dedicated point-to-point connection from your console computer to the KVM-9000. In other words, the KVM-9000 acts as an Internet Service Provider (ISP) to which you can dial in. The connection is established using the Point-to-Point Protocol (PPP). Before you connect to the KVM-9000, make sure to configure your console computer accordingly. For instance, on Windows based operating systems you can configure a dial-up network connection, which defaults to the right settings like PPP.

The Modem Settings panel allows you to configure the remote access to the KVM-9000 using a modem. The meaning of each parameter will be described below. The modem settings are part of the serial settings panel.

Serial line speed

The speed the KVM-9000 is communicating with the modem. Most of all modems available today will support the default value of 115200 bps. In case you are using an old modem and discovering problems try to lower this speed.

Modem Init String

The initialization string used by the KVM-9000 to initialize the modem. The default value will work with all modern standard modems directly connected to a telephone line. In case you have a special modem or the modem is connected to a local telephone switch that requires a special dial sequence in order to establish a connection to the public telephone network, you can change this setting by giving a new string. Refer to the modem's manual about the AT command syntax.

Modem server IP address

This IP address will be assigned to the KVM-9000 itself during the PPP handshake. Since it is a point-to-point IP connection virtually every IP address is possible but you must make sure, it is not interfering with the IP settings of the KVM-9000 and your console computer. The default value will work in most cases.

Modem client IP address

This IP address will be assigned to your console computer during the PPP handshake. Since it is a point-to-point IP connection virtually every IP address is possible but you must make sure, it is not interfering with the IP settings of the KVM-9000 and your console computer. The default value will work in most cases.

56

Page 59 Page 61
Image 60
Page 59 Page 61
Contents LevelOne VersionPage Table of Contents FCC Quick installation guide InstallationKVM-9000 hardware installation Initial IP configurationWeb interface Remote ConsoleTop part of the Remote Console When the server is up and running When the server is deadIntroduction Features Package contentsSystem requirement Model NoSingle port KVM-9000 DescriptionCable diagrams Hardware installation Connecting KVM-9000 to the host systemOperation Overview StepConnect the monitor to the KVM-9000 console side Option Ethernet connectionPage Configuration Initial ConfigurationInitial configuration via Dhcp server KVM-9000 Setup ToolAuthentication Initial configuration via serial consoleIP autoconfiguration Keyboard, Mouse and Video configurationKVM-9000 keyboard settings IP addressRemote Mouse Settings Host system mouse settingsAuto mouse speed and mouse synchronization Fast SyncWindows XP Mouse Settings Single and Double Mouse ModeActive Desktop Usage PrerequisitesTelnet Login into the KVM-9000 and logout Login into the KVM-9000Navigation MainRemote Console Logout from the KVM-9000General description Main Window Remote Console Control BarMonitor Only Remote Console Options MenuExclusive Access ScalingMouse Handling Video Settings Local Cursor11. Video Settings Panel Soft Keyboard12. Soft Keyboard Remote Console Status Line 14. Remote Console Confirmation DialogRemote Control Menu OptionsKVM Console Power onoff shortlong Reset hostcardHelp ClsTerminal Virtual Media Upload a Floppy ImageCD ROM Use Image on Windows Share SambaSelect Sharing to open the configuration dialog Creating an Image Floppy Images Unix and UNIX-like OSCD ROM/ISO Images Dd if=/dev/cdrom of=/tmp/cdrom.imageDriver Installation Drive redirection17. KVM Vision Viewer Setup step 17. Create a new Device Drive Redirection Settings 18. New DeviceOptions OptionsChange Password User ManagementUsers And Groups KVM Settings User Console15. User Console Settings Part Page 17. Keyboard and Mouse Settings Keyboard/Mouse18. Video Settings VideoPage 5Device Settings NetworkPage Dynamic DNS 20. Dynamic DNSPage Security 22. Device Security23. Certificate Settings Certificate24. SSL Certificate Upload Serial Port 25. Serial PortPage Date And Time 27. Date and TimeEvent Log 29. Event LogPage Maintenance Device InformationConnected Users Update Firmware 32. Event Log ListPage Unit Reset 34. Unit ResetTroubleshooting Certificates CE CertificatePin Assignments Page Key Codes Figure B.1 English US Keyboard Layout, used for key codesTable B.1 Key Names Rack mount kit installation diagram Video Modes

KVM-9000 specifications

The LevelOne KVM-9000 is a state-of-the-art KVM switch designed to streamline the management of multiple computer systems from a single workstation. This device is particularly beneficial in environments where space and efficiency are paramount, as it allows IT professionals to control multiple servers, workstations, or virtual machines seamlessly.

One of the standout features of the KVM-9000 is its capability to support an impressive number of computers, accommodating up to 16 different systems. This makes it an ideal solution for data centers, server rooms, and other environments where administrators need to manage a large array of machines without the clutter of numerous keyboards and mice.

The KVM-9000 is built with high-quality technologies that enhance its performance and reliability. It utilizes advanced technology to ensure superior video quality, supporting resolutions up to 1920 x 1200 at 60Hz. This ensures that users can enjoy clear and sharp visuals, crucial for tasks that require attention to detail.

Another characteristic of the KVM-9000 is its user-friendly interface. The device features an intuitive on-screen display (OSD) that simplifies the process of switching between computers. Users can easily navigate through connected devices, select the desired computer, and initiate control with minimal disruption to their workflow.

Security is also a key focus of the KVM-9000. It is equipped with robust security features that protect sensitive data from unauthorized access. The switch supports hotkey and push-button switching options, allowing users to maintain control over their systems while minimizing the risk of accidental changes or breaches.

Moreover, the KVM-9000 incorporates advanced USB technology, offering support for various peripherals. This flexibility allows users to connect a wide range of devices, such as printers, scanners, and external storage, enhancing productivity further.

The KVM-9000 is designed with durability in mind, constructed to withstand the rigors of continuous use in demanding environments. It is compact and lightweight, making installation and relocation a breeze.

In summary, the LevelOne KVM-9000 is an innovative and efficient KVM switch that enhances the management capabilities of multiple computer systems. With its extensive support for connections, excellent video resolution, user-friendly interface, and strong security features, it stands out as a leading choice for professionals seeking to optimize their IT operations.
Top Page Image Contents